My Reply follows quote. On 20/04/2005 14:54 [EMAIL PROTECTED] said: >>The way I have my Graphite is: >> >>DSL Modem=>Router=>Graphite >> =>Wired network >I am very grateful for your help but I still have several questions: > >1.You have a router and the graphite airport, isn't the graphite a >router (of sorts)? > >2. If you have a wire going from the router to the graphite and then >to wired network, how is this done with only one ethernet port on the >graphite? > >3. Do you use a hub? > >Thanks, >Don ------------ 1. The Graphite will route addresses to wireless clients. Fine if that is all that you have. If you have wired clients, then you will need a wired router for those clients. The Graphite can't do both.
2. The wire goes from the router to the Graphite. An additional wire goes from the router to wired clients. (I have outlets in most rooms of my house so I have a couple of switches and hubs for wired clients.) Thus, the router (a Linksys) connected to the DSL modem provides an address to the Graphite which provides addresses to wireless clients. The Linksys also provides addresses to clients connected to the wired network via switches and hubs. Ken -- MacNetwork is sponsored by <http://lowendmac.com/> and... XRouter Pro | Share your DSL or cable modem between multiple computers! Dr. Bott | Only $199 <http://www.drbott.com/prod/MIH130.html> Support Low End Mac <http://lowendmac.com/lists/support.html> MacNetwork list info: <http://lowendmac.com/lists/macnet.html> --> AOL users, remove "mailto:"; end list messages to: <mailto:macnetwork@mail.maclaunch.com> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/macnetwork%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
