Hi guys,
I put dhcp back to the startupitem.executable but using -f.
The port's name is dhcp and the daemon's name is dhcpd, so startupitem.name is
needed.
Regards,
Blair
James Berry wrote:
Hi Mark,
So it looks like the bit magic that got this to work is the -f command,
which basically tells dhcpd not to daemonize, which would be a good
thing in our case, as the process of daemonizing would look to daemondo
or launchd as if dhcpd were exiting, which would cause the constantly
restarting behavior Blair described.
The startupitem.name spec should be completely redundant and unneeded;
the name will default to the name of the port, which is dhcpd, right?
Does that answer your question?
James
On Jan 13, 2008, at 1:25 PM, [EMAIL PROTECTED] wrote:
Blair,
I see. That's fine then. I just wanted to be sure there was a reason
for
making it a script startupitem and there is. I'm cc'ing James (master of
all things startupitem) just in case he knows why the executable
startupitem type wasn't adequate in this case. It seems like it should
have worked. Thanks for fixing the port.
Mark
On Jan 13, 2008, at 12:42 PM, Blair Zajac wrote:
Mark,
It works fine if I use this:
startupitem.create yes
startupitem.name dhcpd
startupitem.executable ${prefix}/sbin/dhcpd -f
startupitem.netchange yes
How's that?
Hi Mark,
I was seeing the following:
1) One dhcpd would start.
2) Every 10 seconds thereafter, another dhcpd would be started, but it
couldn't bind to the port since the first one was running.
It appears that the startupitem infrastructure wasn't keeping track of
dhcpd running and deamonizing itself.
I haven't read the guide yet.† What do you suggest?† Putting a -f to
dhcpd so it stays in the foreground?
Regards,
Blair
--
Blair Zajac, Ph.D.
CTO, OrcaWare Technologies
<[EMAIL PROTECTED]>
Subversion training, consulting and support
[
https://owa016.msoutlookonline.net/owa/redir.aspx?URL=http%3a%2f%2fwww.orcaware.com%2fsvn%2f
]http://www.orcaware.com/svn/
On Jan 13, 2008, at 12:11 PM, [EMAIL PROTECTED] wrote:
Hi Blair,
Executable startupitems are the preferred type.† Daemondo can track
pids
automatically and reliably restart an application if it quits.† See
the
guide on this:
[
https://owa016.msoutlookonline.net/owa/redir.aspx?URL=http%3a%2f%2fguide.macports.org%2f%23reference.startupitems
]http://guide.macports.org/#reference.startupitems
Given how startupitem executables work, I don't see an advantage to
reverting to a "script" startupitem.† Or is there something I am
missing
particular to dhcp?
_______________________________________________
macports-dev mailing list
[email protected]
http://lists.macosforge.org/mailman/listinfo/macports-dev
_______________________________________________
macports-dev mailing list
[email protected]
http://lists.macosforge.org/mailman/listinfo/macports-dev
