On Jun 9, 2009, at 5:18 PM, Rainer Müller wrote:
On 2009-06-09 23:24, Scott Haneda wrote:
# $Id$
PortSystem 1.0
name rbldnsd
version 0.996b
categories sysutils
master_sites http://www.corpit.ru/mjt/rbldnsd/
distfiles ${name}_0.996b.tar.gz
distfiles ${name}_${version}${extract.suffix}
You should not hardcode the version number at multiple places in the
Portfile. This makes it harder to do updates.
I am going to clean this up eventually, I just want to get working
what I thought would be simple, but is evading me. I built this in 30
seconds, making the port is proving troublesome for me.
description test
long_description test
checksums md5 9a0f26f3b33764c325a96bd4c61b26fa \
sha1
9cfe6cf01c54088cecc3a02902c721ee714f1c28 \
rmd160 15be588fb4051f0526084425b586ea7986b6493a
configure.pre_args-delete --prefix=${prefix}
destroot {
xinstall -m 755 -d ${destroot}${prefix}/var
xinstall -m 755 ${worksrcpath}/rbldnsd ${destroot}${prefix}/var
}
As ${prefix}/var is part of the mtree, there is no need to create it
manually.
Cool, thanks.
build {}
By using this line you have overwritten the build phase which is why
'make' never gets run. As you have also overwritten the destroot
phase,
there should not be any attempt to run 'make install'. What you see
failing there is your xinstall command.
I need make, but not make install. xinstall is failing, because make
install was not ran, so the binary of ${worksrcpath}/rbldnsd does not
yet exist.
Suggestions?
--
Scott * If you contact me off list replace talklists@ with scott@ *
_______________________________________________
macports-dev mailing list
[email protected]
http://lists.macosforge.org/mailman/listinfo.cgi/macports-dev
