I posted this same error to the list. Who's the maintainer?
Dave
Lenore Horner wrote:
I tried and then tried installing again to no avail.
Selfupdate reports everything is up to date.
Here's what happened.
[client155-180:~/Documents]% sudo port clean --all esound
Password:
---> Cleaning esound
[client155-180:~/Documents]% sudo port install esound
---> Fetching esound
---> Attempting to fetch esound-0.2.38.tar.bz2 from
http://mandril.creatis.insa-lyon.fr/linux/gnome.org/sources/esound/0.2
---> Verifying checksum(s) for esound
---> Extracting esound
---> Applying patches to esound
---> Configuring esound
---> Building esound with target all
Error: Target org.macports.build returned: shell command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_esound/work/esound-0.2.38"
&& make all " returned error 2
Command output: make: *** No rule to make target `all'. Stop.
Error: Status 1 encountered during processing.
Time spent in user mode (CPU seconds) : 7.517s
Time spent in kernel mode (CPU seconds) : 1.791s
Total time : 0:18.36s
CPU utilisation (percentage) : 50.6%
Times the process was swapped : 0
Times of major page faults : 0
Times of minor page faults : 0
Exit 1
On Sep 13, 2007, at 11:12 AM, [EMAIL PROTECTED] wrote:
Lenore Horner <[EMAIL PROTECTED]> writes:
I get the following message. I have emailed the maintainer and had
no response (in 36 hours).
Does anyone know how to work around this. I can't install Gimp until
this works (as far as I know - Gimp installation keeps hanging here).
I get this error both as part of the Gimp installation via MacPorts
and attempting to install esound alone through MacPorts.
I'm use OS X 10.4.10 and MacPorts 1.5.
sudo port install esound
---> Building esound with target all
Error: Target org.macports.build returned: shell command " cd "/opt/
local/var/macports/build/
_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_e
sound/work/esound-0.2.38" && make all " returned error 2
Command output: make: *** No rule to make target `all'. Stop.
Error: Status 1 encountered during processing.
Exit 1
It works for me. Try 'port clean --all esound' and try it again. Also
make sure you have done a selfupdate if you haven't done it recently.
Mark
_______________________________________________
macports-users mailing list
[email protected]
http://lists.macosforge.org/mailman/listinfo/macports-users
_______________________________________________
macports-users mailing list
[email protected]
http://lists.macosforge.org/mailman/listinfo/macports-users
