To keep your changes from being clobbered the next time you run
selfupdate, you need to create a local repository.
It is not too difficult, and there is some fine documentation at:
http://guide.macports.org/#development.local-repositories
As for fixing the wizardapp, I really am not sure where to begin.
It has something to do with the Info.plist, but that is where my
knowledge on the subject ends.
-Marcus
On Apr 8, 2008, at 7:26 PM, Alejandro Aragon wrote:
Well, if you tell me what to do, I could give it a try. Also, now
that the Portfile builds doxygen with the doxywizard, is it going to
be updated? Something I don't really understand is that when you run
port sync or port selfupdate, the doxygen port will be replaced by
the one in the server, which is the old one, right? So how to get
around this?
aa
On Apr 8, 2008, at 8:21 PM, Marcus Calhoun-Lopez wrote:
Excellent.
The variant wizard builds doxywizard, which is an X11 program build
with qt3.
The variant wizardapp builds a regular double clickable Mac OS
application
(Doxywizard.app in /Applications/MacPorts) which then in turn runs
doxywizard.
wizardapp used to work, but it broke some time ago (either because
of a doxygen upgrade or an OS upgrade).
The error on Leopard is "LSOpenFromURLSpec() failed with error
-10810".
Neither I, nor the maintainer, nor anyone else has put in the
effort to make it work again.
No one seems to have a strong incentive to get it to work.
-Marcus
On Apr 8, 2008, at 7:05 PM, Alejandro Aragon wrote:
Marcus,
I uninstalled doxygen, deleted files doxygen, doxytag and
doxywizard from /opt/local. Reinstalled doxygen with wizard
option, and now the installation went smoothly. Now:
aaragon@/opt/local/bin$port provides doxygen
/opt/local/bin/doxygen is provided by: doxygen
so I guess everything is fine. I would like to ask you also what
is the difference between wizard and wizard-app? and why the
wizard-app does not work?
aa
On Apr 8, 2008, at 7:52 PM, Marcus Calhoun-Lopez wrote:
There may be a bug in the Portfile, but it has been working for me.
I have also had this problem after I interrupted an installation
during the Activation phase.
Since /opt/local/bin/doxygen does not belong to any port, I would
remove it manually.
Once doxygen is installed, you can make sure that it is not a bug
with the command:
port provides /opt/local/bin/doxygen
If all went well, this should belong to the port doxygen.
-Marcus
On Apr 8, 2008, at 3:38 PM, Alejandro Aragon wrote:
Hi Marcus,
I did what you mentioned and the installation went fine this
time. However, just before it finished, it had an error:
$sudo port install doxygen +wizard
---> Fetching doxygen
---> Attempting to fetch doxygen-1.5.5.src.tar.gz from
ftp://ftp.stack.nl/pub/users/dimitri/
---> Verifying checksum(s) for doxygen
---> Extracting doxygen
---> Applying patches to doxygen
---> Configuring doxygen
---> Building doxygen with target all pdf
---> Staging doxygen into destroot
---> Installing doxygen 1.5.5_0+darwin_9+wizard
---> Activating doxygen 1.5.5_0+darwin_9+wizard
Error: Target org.macports.activate returned: Image error: /opt/
local/bin/doxygen already exists and does not belong to a
registered port. Unable to activate port doxygen.
Error: Status 1 encountered during processing.
I made sure that doxygen was not installed before this. Is this
something that needs to be fixed?
aa
On Apr 8, 2008, at 1:48 AM, Marcus Calhoun-Lopez wrote:
In the same directory as the Portfile, there is a directory
called files.
Put the file qfiledefs_p.patch (downloaded from the Ticket
page) into the files directory.
Since it is not there now, MacPorts is trying (unsuccessfully)
to download it.
On Leopard, I have the wizard variant working but not the
wizardapp variant.
-Marcus
On Apr 7, 2008, at 11:12 PM, Alejandro Aragon wrote:
I downloaded the .diff file and applied the patch manually.
Then:
aaragon@/opt/local/var/macports/sources/rsync.macports.org/
release/ports/textproc/doxygen$sudo port -v install doxygen
+wizard
---> Fetching doxygen
---> qfiledefs_p.patch doesn't seem to exist in /opt/local/
var/macports/distfiles/doxygen
---> Attempting to fetch qfiledefs_p.patch from
http://svn.macports.org/repository/macports/distfiles/doxygen
% Total % Received % Xferd Average Speed Time
Time Time Current
Dload Upload Total Spent
Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:--
--:--:-- 0
---> Attempting to fetch qfiledefs_p.patch from
http://svn.macports.org/repository/macports/distfiles/general/
% Total % Received % Xferd Average Speed Time
Time Time Current
Dload Upload Total Spent
Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:--
--:--:-- 0
---> Attempting to fetch qfiledefs_p.patch from
http://svn.macports.org/repository/macports/downloads/doxygen
% Total % Received % Xferd Average Speed Time
Time Time Current
Dload Upload Total Spent
Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:--
--:--:-- 0
Error: Target org.macports.fetch returned: fetch failed
Warning: the following items did not execute (for doxygen):
org.macports.activate org.macports.fetch org.macports.extract
org.macports.checksum org.macports.patch
org.macports.configure org.macports.build
org.macports.destroot org.macports.install
Error: Status 1 encountered during processing.
and the same with the wizardapp variant. I went to that
location in the repository and doxygen does not exist.
Am I doing something wrong here or the patch is not good?
aa
On Apr 7, 2008, at 11:21 PM, Marcus Calhoun-Lopez wrote:
There is some discussion about this issue (as well as a
patch) on the ticket:
http://trac.macports.org/projects/macports/ticket/14603
-Marcus
On Apr 7, 2008, at 9:15 PM, Alejandro Aragon wrote:
Hello everyone,
I tried to build doxygen with the doxywizard variant, which
depends on qt and I had these errors:
[EMAIL PROTECTED] port install doxygen +wizard
---> Fetching doxygen
---> Verifying checksum(s) for doxygen
---> Extracting doxygen
---> Applying patches to doxygen
---> Configuring doxygen
---> Building doxygen with target all pdf
Error: Target org.macports.build returned: shell command "
cd "/opt/local/var/macports/build/
_opt_local_var_macports_sources_rsync
.macports.org_release_ports_textproc_doxygen/work/
doxygen-1.5.4" && make all pdf " returned error 2
Command output: doxywizard.cpp:1414: error: 'fn' was not
declared in this scope
doxywizard.cpp:1416: error: 'QFile' was not declared in this
scope
doxywizard.cpp:1416: error: expected `;' before 'f'
doxywizard.cpp:1417: error: 'f' was not declared in this scope
doxywizard.cpp:1417: error: 'IO_WriteOnly' was not declared
in this scope
doxywizard.cpp:1419: error: 'QTextStream' was not declared
in this scope
doxywizard.cpp:1419: error: expected `;' before 't'
doxywizard.cpp:1420: error: 't' was not declared in this scope
doxywizard.cpp:1420: error: invalid use of undefined type
'struct QTextEdit'
doxywizard.h:15: error: forward declaration of 'struct
QTextEdit'
doxywizard.cpp:1421: error: 'statusBar' was not declared in
this scope
doxywizard.cpp:1425: error: 'QMessageBox' has not been
declared
doxywizard.cpp:1426: error: 'warning' was not declared in
this scope
doxywizard.cpp: In function 'int main(int, char**)':
doxywizard.cpp:1435: error: 'QApplication' was not declared
in this scope
doxywizard.cpp:1435: error: expected `;' before 'a'
doxywizard.cpp:850: error: 'MainWidget::~MainWidget()' is
private
doxywizard.cpp:1436: error: within this context
doxywizard.cpp:1119: error: 'void
MainWidget::loadConfigFromFile(int)' is private
doxywizard.cpp:1439: error: within this context
doxywizard.cpp:1439: error: invalid conversion from 'char*'
to 'int'
doxywizard.cpp:1439: error: initializing argument 1 of
'void MainWidget::loadConfigFromFile(int)'
doxywizard.cpp:1443: error: 'printf' was not declared in
this scope
doxywizard.cpp:1446: error: 'a' was not declared in this scope
doxywizard.cpp:1447: error: 'class MainWidget' has no member
named 'show'
gmake[2]: *** [obj/doxywizard.o] Error 1
gmake[2]: Leaving directory `/opt/local/var/macports/build/
_opt_local_var_macports_sources_rsync
.macports.org_release_ports_textproc_doxygen/work/
doxygen-1.5.4/addon/doxywizard'
gmake[1]: *** [all] Error 2
gmake[1]: Leaving directory `/opt/local/var/macports/build/
_opt_local_var_macports_sources_rsync
.macports.org_release_ports_textproc_doxygen/work/
doxygen-1.5.4/addon/doxywizard'
make: *** [all] Error 2
aa
_______________________________________________
macports-users mailing list
[email protected]
http://lists.macosforge.org/mailman/listinfo/macports-users
_______________________________________________
macports-users mailing list
[email protected]
http://lists.macosforge.org/mailman/listinfo/macports-users
