I made a small progress. I decided to download the latest stable etherape-0.9.10 source and build it myself, using libraries that were built when I was trying out the macports version. Once I sudo myself into root, I performed the following. Now I can see IP addresses, but still not node cicles and traffic graphs. I am contemplating to rebuild all libraries that etherape depends; using all latest stable to see if it make any difference, but I know given my current work load, such a time consuming task may have to wait. So, I would appreciate any hints. Thanks, --Zack macbook-0:~ root# sudo launchctl load -w /opt/local/Library/LaunchAgents/org.freedesktop.dbus-session.plistmacbook-0:~ root# /usr/local/bin/etherape EtherApe-Message: Minimum delay set to 0 msEtherApe-Message: Maximum delay set to 9223372036854775807 ms (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4) (etherape:31561): EtherApe-WARNING **: not enough captured data, terminating protocol decode for 'NBSS' (level 4)
_______________________________________________ macports-users mailing list [email protected] http://lists.macosforge.org/mailman/listinfo.cgi/macports-users
