Hardware: PowerPC G4 1.42Ghz / 1 GB Ram MacminiPowerMac10,1
OS: Leopard 10.5.8Software: MacPorts-2.0.4.pkg
Command Executed: sudo port install openssh
Question1: Does this warrant a trouble ticket?Question2: Can I override the
checksum error the log shows the numbers match up.Question3: Should I wait for
this to be fixed?
Thanks for any help in advance:)
Log:version:1:debug:main epoch: in tree: 0 installed: 0:debug:main xz 5.0.3_0
exists in the ports tree:debug:main xz 5.0.3_0 is the latest
installed:debug:main xz 5.0.3_0 is active:debug:main Merging existing variants
'' into variants:debug:main new fully merged portvariants: :debug:main Changing
to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz:debug:main
OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load
registered provides 'load', a pre-existing procedure. Target override will not
be provided:debug:main org.macports.distfiles registered provides 'distfiles',
a pre-existing procedure. Target override will not be provided:debug:main
adding the default universal variant:debug:main Reading variant descriptions
from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main
No need to upgrade! xz 5.0.3_0 >= xz 5.0.3_0:debug:main epoch: in tree: 0
installed: 0:debug:main libiconv 1.14_0 exists in the ports tree:debug:main
libiconv 1.14_0 is the latest installed:debug:main libiconv 1.14_0 is
active:debug:main Merging existing variants '' into variants:debug:main new
fully merged portvariants: :debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv:debug:main
OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load
registered provides 'load', a pre-existing procedure. Target override will not
be provided:debug:main org.macports.distfiles registered provides 'distfiles',
a pre-existing procedure. Target override will not be provided:debug:main Using
group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl:debug:main
Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main
universal variant already exists, so not adding the default one:debug:main No
need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0:debug:main epoch: in tree:
0 installed: 0:debug:main gettext 0.18.1.1_2 exists in the ports
tree:debug:main gettext 0.18.1.1_2 is the latest installed:debug:main gettext
0.18.1.1_2 is active:debug:main Merging existing variants '' into
variants:debug:main new fully merged portvariants: :debug:main Changing to port
directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext:debug:main
OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load
registered provides 'load', a pre-existing procedure. Target override will not
be provided:debug:main org.macports.distfiles registered provides 'distfiles',
a pre-existing procedure. Target override will not be provided:debug:main Using
group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl:debug:main
Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main
Using group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl:debug:main
universal variant already exists, so not adding the default one:debug:main No
need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2:debug:main epoch: in
tree: 0 installed: 0:debug:main ncurses 5.9_1 exists in the ports
tree:debug:main ncurses 5.9_1 is the latest installed:debug:main ncurses 5.9_1
is active:debug:main Merging existing variants '' into variants:debug:main new
fully merged portvariants: :debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses:debug:main
OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load
registered provides 'load', a pre-existing procedure. Target override will not
be provided:debug:main org.macports.distfiles registered provides 'distfiles',
a pre-existing procedure. Target override will not be provided:debug:main
adding the default universal variant:debug:main Reading variant descriptions
from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main
No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1:debug:main epoch: in tree:
0 installed: 0:debug:main expat 2.0.1_1 exists in the ports tree:debug:main
expat 2.0.1_1 is the latest installed:debug:main expat 2.0.1_1 is
active:debug:main Merging existing variants '' into variants:debug:main new
fully merged portvariants: :debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat:debug:main
OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load
registered provides 'load', a pre-existing procedure. Target override will not
be provided:debug:main org.macports.distfiles registered provides 'distfiles',
a pre-existing procedure. Target override will not be provided:debug:main
adding the default universal variant:debug:main Reading variant descriptions
from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main
No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1:debug:main epoch: in tree:
0 installed: 0:debug:main zlib 1.2.6_0 exists in the ports tree:debug:main zlib
1.2.6_0 is the latest installed:debug:main zlib 1.2.6_0 is active:debug:main
Merging existing variants '' into variants:debug:main new fully merged
portvariants: :debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib:debug:main
OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load
registered provides 'load', a pre-existing procedure. Target override will not
be provided:debug:main org.macports.distfiles registered provides 'distfiles',
a pre-existing procedure. Target override will not be provided:debug:main Using
group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl:debug:main
adding the default universal variant:debug:main Reading variant descriptions
from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main
No need to upgrade! zlib 1.2.6_0 >= zlib 1.2.6_0:debug:main epoch: in tree: 0
installed: 0:debug:main libffi 3.0.10_2 exists in the ports tree:debug:main
libffi 3.0.10_2 is the latest installed:debug:main libffi 3.0.10_2 is
active:debug:main Merging existing variants '' into variants:debug:main new
fully merged portvariants: :debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi:debug:main
OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load
registered provides 'load', a pre-existing procedure. Target override will not
be provided:debug:main org.macports.distfiles registered provides 'distfiles',
a pre-existing procedure. Target override will not be provided:debug:main Using
group file
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl:debug:main
Reading variant descriptions from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main
universal variant already exists, so not adding the default one:debug:main No
need to upgrade! libffi 3.0.10_2 >= libffi 3.0.10_2:debug:main epoch: in tree:
0 installed: 0:debug:main perl5 5.12.3_1 exists in the ports tree:debug:main
perl5 5.12.3_1 +perl5_12 is the latest installed:debug:main perl5 5.12.3_1
+perl5_12 is active:debug:main Merging existing variants '+perl5_12' into
variants:debug:main new fully merged portvariants: perl5_12 +:debug:main
Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5:debug:main
OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load
registered provides 'load', a pre-existing procedure. Target override will not
be provided:debug:main org.macports.distfiles registered provides 'distfiles',
a pre-existing procedure. Target override will not be provided:debug:main
universal_variant is false, so not adding the default universal
variant:debug:main Executing variant perl5_12 provides perl5_12:debug:main No
need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1:debug:main epoch: in tree: 0
installed: 0:debug:main perl5.12 5.12.3_3 exists in the ports tree:debug:main
perl5.12 5.12.3_3 is the latest installed:debug:main perl5.12 5.12.3_3 is
active:debug:main Merging existing variants '' into variants:debug:main new
fully merged portvariants: :debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12:debug:main
OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load
registered provides 'load', a pre-existing procedure. Target override will not
be provided:debug:main org.macports.distfiles registered provides 'distfiles',
a pre-existing procedure. Target override will not be provided:debug:main
adding the default universal variant:debug:main Reading variant descriptions
from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main
No need to upgrade! perl5.12 5.12.3_3 >= perl5.12 5.12.3_3:debug:main epoch:
in tree: 0 installed: 0:debug:main gdbm 1.10_1 exists in the ports
tree:debug:main gdbm 1.10_1 is the latest installed:debug:main gdbm 1.10_1 is
active:debug:main Merging existing variants '' into variants:debug:main new
fully merged portvariants: :debug:main Changing to port directory:
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm:debug:main
OS darwin/9.8.0 (Mac OS X 10.5) arch powerpc:debug:main org.macports.load
registered provides 'load', a pre-existing procedure. Target override will not
be provided:debug:main org.macports.distfiles registered provides 'distfiles',
a pre-existing procedure. Target override will not be provided:debug:main
adding the default universal variant:debug:main Reading variant descriptions
from
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf:debug:main
No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1:msg:main ---> Computing
dependencies for glib2:info:main .:debug:main Checking for conflicts against
glib2:debug:main Searching for dependency: glib2-devel:debug:main Didn't find
receipt, going to depspec regex for: glib2-devel:debug:main Searching for
dependency: xz:debug:main Found Dependency: receipt exists for xz:debug:main
Searching for dependency: gettext:debug:main Found Dependency: receipt exists
for gettext:debug:main Searching for dependency: libiconv:debug:main Found
Dependency: receipt exists for libiconv:debug:main Searching for dependency:
zlib:debug:main Found Dependency: receipt exists for zlib:debug:main Searching
for dependency: libffi:debug:main Found Dependency: receipt exists for
libffi:debug:main Searching for dependency: perl5:debug:main Found Dependency:
receipt exists for perl5:msg:main :debug:main Executing org.macports.main
(glib2):debug:main changing euid/egid - current euid: 0 - current egid:
0:debug:main egid changed to: 500:debug:main euid changed to: 502:debug:main
Skipping completed org.macports.archivefetch (glib2):debug:main Privilege
de-escalation not attempted as not running as root.:debug:main Skipping
completed org.macports.fetch (glib2):debug:main Privilege de-escalation not
attempted as not running as root.:debug:checksum checksum phase started at Thu
Mar 22 20:55:48 MDT 2012:notice:checksum ---> Verifying checksum(s) for
glib2:debug:checksum Executing org.macports.checksum (glib2):info:checksum --->
Checksumming glib-2.30.3.tar.xz:error:checksum Checksum (rmd160) mismatch for
glib-2.30.3.tar.xz:info:checksum Portfile checksum: glib-2.30.3.tar.xz rmd160
0887b08e2fff75c325ed1fb1123baaf42dc9779b:info:checksum Distfile checksum:
glib-2.30.3.tar.xz rmd160
fc40826807f890ad6c34bf91b06d72e76ebec9f0:error:checksum Checksum (sha256)
mismatch for glib-2.30.3.tar.xz:info:checksum Portfile checksum:
glib-2.30.3.tar.xz sha256
e6cbb27c71c445993346e785e8609cc75cea2941e32312e544872feba572dd27:info:checksum
Distfile checksum: glib-2.30.3.tar.xz sha256
e6038248d8bd00eeddebf90d630659d862989e8422f7ff73b0e291cb61ee3e22:info:checksum
The correct checksum line may be::info:checksum checksums rmd160
fc40826807f890ad6c34bf91b06d72e76ebec9f0 \ sha256
e6038248d8bd00eeddebf90d630659d862989e8422f7ff73b0e291cb61ee3e22:error:checksum
Target org.macports.checksum returned: Unable to verify file
checksums:debug:checksum Backtrace: Unable to verify file checksums while
executing"$procedure $targetname":info:checksum Warning: the following items
did not execute (for glib2): org.macports.activate org.macports.checksum
org.macports.extract org.macports.patch org.macports.configure
org.macports.build org.macports.destroot org.macports.install:notice:checksum
Log for glib2 is at:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_glib2/glib2/main.log
_______________________________________________
macports-users mailing list
[email protected]
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users
