You're right - I realized after that it had just been bumped. But I noticed the new version built as well without trouble.
Ken $ port -v installed smake cdrtools The following ports are currently installed: cdrtools @3.00_1 platform='darwin 10' archs='x86_64' date='2017-09-02T11:22:23-0700' cdrtools @3.01_0 (active) platform='darwin 10' archs='x86_64' date='2017-09-02T12:19:56-0700' smake @1.2.3_0 platform='darwin 10' archs='x86_64' date='2017-09-02T11:13:10-0700' smake @1.2.5_0 (active) platform='darwin 10' archs='x86_64' date='2017-09-02T12:16:01-0700' On Sat, Sep 2, 2017 at 1:04 PM, Richard L. Hamilton <[email protected]> wrote: > That's not the latest cdrtools - that one had worked for me too, when it > came out probably a couple of months ago. > myeye:~ root# port -v installed cdrtools > The following ports are currently installed: > cdrtools @3.00_1 (active) platform='darwin 10' archs='x86_64' > date='2017-06-21T15:32:20-0400' > myeye:~ root# port list cdrtools > cdrtools @3.01 sysutils/cdrtools > myeye:~ root# > > @3.01 is what won't install (for me) with smake @1.2.3_0. > > > > > On Sep 2, 2017, at 14:22, Ken Cunningham <ken.cunningham.webuse@gmail. > com> wrote: > > > > Works for me on 10.6. Sorry. > > > > $ port -v installed smake > > The following ports are currently installed: > > smake @1.2.3_0 (active) platform='darwin 10' archs='x86_64' > date='2017-09-02T11:13:10-0700' > > > > $ port -v installed cdrtools > > The following ports are currently installed: > > cdrtools @3.00_1 (active) platform='darwin 10' archs='x86_64' > date='2017-09-02T11:22:23-0700' > > > > > > > > Perhaps open a ticket so we can sort out what's going on over time. > > > > Ken > > > > > > > > > > > > On 2017-09-02, at 6:27 AM, Richard L. Hamilton wrote: > > > >> I suspect the absence of the latest smake may also cause the failure of > the latest cdrtools to build (since building it uses smake, and IIRC > they're both from the same author); but until I can get the latest smake > built, I won't know for sure. :-) > >> > >> > >> <main.log-smake.txt.gz> > >> <main.log-cdrtools.txt.gz> > > > >
