I got it working (port install ola) finally by following the latest suggestion in the port output (deactivate py27-protobuf) Looking forward to what else might be broken after this :-( At least port install ola went through now.
Thanks again, Christoph > Am 13.01.2019 um 09:58 schrieb Christoph Kukulies <[email protected]>: > > I did as you suggested: sudo port deactivate protobuf-cpp > which worked > > Christophs-MacBook-Pro: kuku$ sudo port deactivate protobuf-cpp > Note: It is not recommended to uninstall/deactivate a port that has > dependents as it breaks the dependents. > The following ports will break: py27-protobuf @2.6.1_2 > Continue? [y/N]: y > Warning: Deactivate forced. Proceeding despite dependencies. > ---> Deactivating protobuf-cpp @2.6.1_0 > ---> Cleaning protobuf-cpp > Christophs-MacBook-Pro: > > > Then I’m getting: > > Christophs-MacBook-Pro: kuku$ sudo port install ola > ---> Computing dependencies for ola > The following dependencies will be installed: > automake > libftdi0 > liblo > libtool > libusb-compat > protobuf3-cpp > py27-protobuf3 > Continue? [Y/n]: > ---> Fetching archive for automake > Warning: Your DNS servers incorrectly claim to know the address of > nonexistent hosts. This may cause checksum mismatches for some ports. See > this page for more information: > <https://trac.macports.org/wiki/MisbehavingServers > <https://trac.macports.org/wiki/MisbehavingServers>> > ---> Attempting to fetch automake-1.16.1_0.darwin_18.noarch.tbz2 from > https://packages.macports.org/automake > <https://packages.macports.org/automake> > ---> Attempting to fetch automake-1.16.1_0.darwin_18.noarch.tbz2.rmd160 from > https://packages.macports.org/automake > <https://packages.macports.org/automake> > ---> Installing automake @1.16.1_0 > ---> Activating automake @1.16.1_0 > ---> Cleaning automake > ---> Fetching archive for libusb-compat > ---> Attempting to fetch libusb-compat-0.1.5_0.darwin_18.x86_64.tbz2 from > https://packages.macports.org/libusb-compat > <https://packages.macports.org/libusb-compat> > ---> Attempting to fetch libusb-compat-0.1.5_0.darwin_18.x86_64.tbz2.rmd160 > from https://packages.macports.org/libusb-compat > <https://packages.macports.org/libusb-compat> > ---> Installing libusb-compat @0.1.5_0 > ---> Activating libusb-compat @0.1.5_0 > ---> Cleaning libusb-compat > ---> Fetching archive for libftdi0 > ---> Attempting to fetch libftdi0-0.20_1.darwin_18.x86_64.tbz2 from > https://packages.macports.org/libftdi0 > <https://packages.macports.org/libftdi0> > ---> Attempting to fetch libftdi0-0.20_1.darwin_18.x86_64.tbz2.rmd160 from > https://packages.macports.org/libftdi0 > <https://packages.macports.org/libftdi0> > ---> Installing libftdi0 @0.20_1 > ---> Activating libftdi0 @0.20_1 > ---> Cleaning libftdi0 > ---> Fetching archive for liblo > ---> Attempting to fetch liblo-0.28_0.darwin_18.x86_64.tbz2 from > https://packages.macports.org/liblo <https://packages.macports.org/liblo> > ---> Attempting to fetch liblo-0.28_0.darwin_18.x86_64.tbz2.rmd160 from > https://packages.macports.org/liblo <https://packages.macports.org/liblo> > ---> Installing liblo @0.28_0 > ---> Activating liblo @0.28_0 > ---> Cleaning liblo > ---> Fetching archive for libtool > ---> Attempting to fetch libtool-2.4.6_5.darwin_18.x86_64.tbz2 from > https://packages.macports.org/libtool <https://packages.macports.org/libtool> > ---> Attempting to fetch libtool-2.4.6_5.darwin_18.x86_64.tbz2.rmd160 from > https://packages.macports.org/libtool <https://packages.macports.org/libtool> > ---> Installing libtool @2.4.6_5 > ---> Activating libtool @2.4.6_5 > ---> Cleaning libtool > ---> Fetching archive for protobuf3-cpp > ---> Attempting to fetch protobuf3-cpp-3.6.1_0.darwin_18.x86_64.tbz2 from > https://packages.macports.org/protobuf3-cpp > <https://packages.macports.org/protobuf3-cpp> > ---> Attempting to fetch protobuf3-cpp-3.6.1_0.darwin_18.x86_64.tbz2.rmd160 > from https://packages.macports.org/protobuf3-cpp > <https://packages.macports.org/protobuf3-cpp> > ---> Installing protobuf3-cpp @3.6.1_0 > ---> Activating protobuf3-cpp @3.6.1_0 > ---> Cleaning protobuf3-cpp > ---> Fetching archive for py27-protobuf3 > ---> Attempting to fetch py27-protobuf3-3.6.1_0.darwin_18.x86_64.tbz2 from > https://packages.macports.org/py27-protobuf3 > <https://packages.macports.org/py27-protobuf3> > ---> Attempting to fetch py27-protobuf3-3.6.1_0.darwin_18.x86_64.tbz2.rmd160 > from https://packages.macports.org/py27-protobuf3 > <https://packages.macports.org/py27-protobuf3> > ---> Installing py27-protobuf3 @3.6.1_0 > ---> Activating py27-protobuf3 @3.6.1_0 > Error: Failed to activate py27-protobuf3: Image error: > /opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/google/protobuf/__init__.py > is being used by the active py27-protobuf port. Please deactivate this port > first, or use 'port -f activate py27-protobuf3' to force the activation. > Error: See > /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_macports_release_tarballs_ports_python_py-protobuf3/py27-protobuf3/main.log > for details. > Error: Follow https://guide.macports.org/#project.tickets > <https://guide.macports.org/#project.tickets> to report a bug. > Error: Processing of port ola failed > Christophs-MacBook-Pro: kuku$ > > >> Am 12.01.2019 um 19:09 schrieb Mojca Miklavec <[email protected] >> <mailto:[email protected]>>: >> >> On Sat, 12 Jan 2019 at 17:45, Christoph Kukulies wrote: >>> >>> Finally I tried: >>> >>> Christophs-MBP:ola kuku$ sudo port install ola >>> Password: >>> ---> Computing dependencies for ola >>> Error: Can't install protobuf3-cpp because conflicting ports are active: >>> protobuf-cpp >> >> That's most likely the result of the manual installation of that port >> when you followed the installation instructions: >> >> # not asking you to repeat this! >> sudo port install pkgconfig cppunit protobuf-cpp libmicrohttpd >> libusb py27-protobuf >> >> So most likely >> sudo port deactivate protobuf-cpp >> should solve the problem. If it doesn't, it will tell you which other >> ports depend on protobuf-cpp, and then you can check whether you can >> deactivate/uninstall those. >> >> Mojca >
