Hi,
I have backported to appletouch driver from 2.6.20 to 2.6.18. Find the
patch attached.
Kind regards
Ortwin Glück
--- appletouch.c.orig 2007-01-13 21:33:00.000000000 +0100
+++ appletouch.c 2007-01-14 00:13:55.000000000 +0100
@@ -38,14 +38,29 @@
#define APPLE_VENDOR_ID 0x05AC
/* These names come from Info.plist in AppleUSBTrackpad.kext */
-#define GEYSER_ANSI_PRODUCT_ID 0x0214
-#define GEYSER_ISO_PRODUCT_ID 0x0215
-#define GEYSER_JIS_PRODUCT_ID 0x0216
+#define FOUNTAIN_ANSI_PRODUCT_ID 0x020E
+#define FOUNTAIN_ISO_PRODUCT_ID 0x020F
+
+#define FOUNTAIN_TP_ONLY_PRODUCT_ID 0x030A
+
+#define GEYSER1_TP_ONLY_PRODUCT_ID 0x030B
+
+#define GEYSER_ANSI_PRODUCT_ID 0x0214
+#define GEYSER_ISO_PRODUCT_ID 0x0215
+#define GEYSER_JIS_PRODUCT_ID 0x0216
/* MacBook devices */
-#define GEYSER3_ANSI_PRODUCT_ID 0x0217
-#define GEYSER3_ISO_PRODUCT_ID 0x0218
-#define GEYSER3_JIS_PRODUCT_ID 0x0219
+#define GEYSER3_ANSI_PRODUCT_ID 0x0217
+#define GEYSER3_ISO_PRODUCT_ID 0x0218
+#define GEYSER3_JIS_PRODUCT_ID 0x0219
+
+/*
+ * Geyser IV: same as Geyser III according to Info.plist in
AppleUSBTrackpad.kext
+ * -> same IOClass (AppleUSBGrIIITrackpad), same acceleration tables
+ */
+#define GEYSER4_ANSI_PRODUCT_ID 0x021A
+#define GEYSER4_ISO_PRODUCT_ID 0x021B
+#define GEYSER4_JIS_PRODUCT_ID 0x021C
#define ATP_DEVICE(prod) \
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
@@ -58,20 +73,26 @@
/* table of devices that work with this driver */
static struct usb_device_id atp_table [] = {
- { ATP_DEVICE(0x020E) },
- { ATP_DEVICE(0x020F) },
- { ATP_DEVICE(0x030A) },
- { ATP_DEVICE(0x030B) },
+ { ATP_DEVICE(FOUNTAIN_ANSI_PRODUCT_ID) },
+ { ATP_DEVICE(FOUNTAIN_ISO_PRODUCT_ID) },
+ { ATP_DEVICE(FOUNTAIN_TP_ONLY_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER1_TP_ONLY_PRODUCT_ID) },
/* PowerBooks Oct 2005 */
{ ATP_DEVICE(GEYSER_ANSI_PRODUCT_ID) },
{ ATP_DEVICE(GEYSER_ISO_PRODUCT_ID) },
{ ATP_DEVICE(GEYSER_JIS_PRODUCT_ID) },
+ /* Core Duo MacBook & MacBook Pro */
{ ATP_DEVICE(GEYSER3_ANSI_PRODUCT_ID) },
{ ATP_DEVICE(GEYSER3_ISO_PRODUCT_ID) },
{ ATP_DEVICE(GEYSER3_JIS_PRODUCT_ID) },
+ /* Core2 Duo MacBook & MacBook Pro */
+ { ATP_DEVICE(GEYSER4_ANSI_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER4_ISO_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER4_JIS_PRODUCT_ID) },
+
/* Terminating entry */
{ }
};
@@ -100,15 +121,15 @@
* 0 <= y < 646
*/
#define ATP_XFACT 64
-#define ATP_YFACT 43
+#define ATP_YFACT 86
/*
* Threshold for the touchpad sensors. Any change less than ATP_THRESHOLD is
* ignored.
*/
-#define ATP_THRESHOLD 5
+#define ATP_THRESHOLD 3
-/* MacBook Pro (Geyser 3) initialization constants */
+/* MacBook Pro (Geyser 3 & 4) initialization constants */
#define ATP_GEYSER3_MODE_READ_REQUEST_ID 1
#define ATP_GEYSER3_MODE_WRITE_REQUEST_ID 9
#define ATP_GEYSER3_MODE_REQUEST_VALUE 0x300
@@ -154,6 +175,13 @@
MODULE_DESCRIPTION("Apple PowerBooks USB touchpad driver");
MODULE_LICENSE("GPL");
+/*
+ * Make the threshold a module parameter
+ */
+static int threshold = ATP_THRESHOLD;
+module_param(threshold, int, 0644);
+MODULE_PARM_DESC(threshold, "Discards any change in data from a sensor
(trackpad has hundreds of these sensors) less than this value");
+
static int debug = 1;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Activate debugging output");
@@ -174,7 +202,10 @@
return (productId == GEYSER3_ANSI_PRODUCT_ID) ||
(productId == GEYSER3_ISO_PRODUCT_ID) ||
- (productId == GEYSER3_JIS_PRODUCT_ID);
+ (productId == GEYSER3_JIS_PRODUCT_ID) ||
+ (productId == GEYSER4_ANSI_PRODUCT_ID) ||
+ (productId == GEYSER4_ISO_PRODUCT_ID) ||
+ (productId == GEYSER4_JIS_PRODUCT_ID);
}
static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
@@ -183,16 +214,48 @@
int i;
/* values to calculate mean */
int pcum = 0, psum = 0;
+ int is_increasing = 0;
*fingers = 0;
for (i = 0; i < nb_sensors; i++) {
- if (xy_sensors[i] < ATP_THRESHOLD)
+ if (xy_sensors[i] < threshold) {
+ if (is_increasing)
+ is_increasing = 0;
+
continue;
- if ((i - 1 < 0) || (xy_sensors[i - 1] < ATP_THRESHOLD))
+ }
+
+ /*
+ * Makes the finger detection more versatile. For example,
+ * two fingers with no gap will be detected. Also, my
+ * tests show it less likely to have intermittent loss
+ * of multiple finger readings while moving around (scrolling).
+ *
+ * Changes the multiple finger detection to counting humps on
+ * sensors (transitions from nonincreasing to increasing)
+ * instead of counting transitions from low sensors (no
+ * finger reading) to high sensors (finger above
+ * sensor)
+ *
+ * - Jason Parekh <[EMAIL PROTECTED]>
+ */
+ if (i < 1 || (!is_increasing && xy_sensors[i - 1] <
xy_sensors[i])) {
(*fingers)++;
- pcum += xy_sensors[i] * i;
- psum += xy_sensors[i];
+ is_increasing = 1;
+ } else if (i > 0 && xy_sensors[i - 1] >= xy_sensors[i]) {
+ is_increasing = 0;
+ }
+
+ /*
+ * Subtracts threshold so a high sensor that just passes the
threshold
+ * won't skew the calculated absolute coordinate. Fixes an
issue
+ * where slowly moving the mouse would occassionaly jump a
number of
+ * pixels (let me restate--slowly moving the mouse makes this
issue
+ * most apparent).
+ */
+ pcum += (xy_sensors[i] - threshold) * i;
+ psum += (xy_sensors[i] - threshold);
}
if (psum > 0) {
@@ -311,8 +374,8 @@
dev->x_old = dev->y_old = -1;
memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
- if (atp_is_geyser_3(dev)) /* No 17" Macbooks (yet) */
- goto exit;
+// if (atp_is_geyser_3(dev)) /* No 17" Macbooks (yet) */
+// goto exit;
/* 17" Powerbooks have extra X sensors */
for (i = (atp_is_geyser_2(dev)?15:16); i < ATP_XSENSORS; i++) {
@@ -437,9 +500,9 @@
for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
endpoint = &iface_desc->endpoint[i].desc;
if (!int_in_endpointAddr &&
- (endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_INT)) {
+ (endpoint->bEndpointAddress & USB_DIR_IN) &&
+ ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_INT)) {
/* we found an interrupt in endpoint */
int_in_endpointAddr = endpoint->bEndpointAddress;
break;
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Mactel-linux-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mactel-linux-devel
