Hi. Finally i got it :D
I can record with irrecord but :( i get this message at the end:

Now hold down button "minus".

Please enter the name for the next button (press <ENTER> to finish
recording)

Checking for toggle bit mask.
Please press an arbitrary button repeatedly as fast as possible.
Make sure you keep pressing the SAME button and that you DON'T HOLD
hthe button down!.
If you can't see any dots appear, then wait a bit between button presses.
..............................
Invalid toggle bit.
Successfully written config file.

But it is not successful because the lircd.conf shows:


# Please make this file available to others
# by sending it to <[EMAIL PROTECTED]>
#
# this config file was automatically generated
# using lirc-0.8.2-CVS(dev/input) on Thu Aug  2 23:26:35 2007
#
# contributed by
#
# brand:                       Desktop/lircd.conf
# model no. of remote control:
# devices being controlled by this remote:
#

begin remote

  name  Desktop/lircd.conf
  bits            0
  eps            30
  aeps          100

  one             0     0
  zero            0     0
  pre_data_bits   32
  pre_data       0xFF00
  gap          211971
  toggle_bit_mask 0x80000000

      begin codes
          menu                     0x0
          play                     0x0
          ffwd                     0x0
          rew                      0x0
          plus                     0x0
          minus                    0x0
      end codes

end remote


And, as you can see, all keys show me the same, nothing.

Can anyone help me?

Thanks a lot
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/
_______________________________________________
Mactel-linux-users mailing list
Mactel-linux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mactel-linux-users

Reply via email to