Thanks Esther now everything works cent pour cent. I reset the password, 
and OS X now is up-to-date. I installed updates that are more than 1gb in 
that MacBook :) ..

Now each time I restart the machine, I have to type the password. How can I 
have Mac log in without asking for a password?

All the Best
Khalid
  ----- Original Message ----- 
  From: Esther
  To: [email protected]
  Sent: Monday, August 24, 2009 1:20 AM
  Subject: Re: Updating Mac 10.5 (password)


  Hello,


  I went and found my install discs and inserted them to check the 
instructions.  I think what you found is simply that the Apple menu (the 
first menu on the menu bar when you use VO-M) is dimmed.  This is because 
all those operations reference the system loaded on the hard drive, and you 
are by-passing the hard drive to boot off the install disc.  If you arrow 
across to any of the other menu options on the menu bar and specifically, 
if you press "u" or navigate with your arrow keys to the Utilities menu on 
the menu bar and arrow down, none of the entries should be dimmed.  If you 
arrow down to the "Reset Password" option of the Utilities menu I think you 
will be fine.   Just remember that the password you want to reset is for 
your friend -- if he has Administrator privileges.  Do not select System 
Administrator as the account for the password you want to reset.  Also, 
don't worry or try to set anything about keychains.  Chances are that if 
your friend never knew his password that there are no keychains to worry 
about.


  You can quit at any time with Command-Q, or by choosing the option to 
quit from the Installer menu on the menu bar.


  HTH


  Cheers,


  Esther


  Dr.Khalid wrote:


    Thanks for the instruction .

    I was able to choose English from the list of languages, then I pressed 
continue. I then searched for utility which I couldn't find . So I pressed 
VO-M , but all the options were dimmed . I couldn't choose the system 
preference.. I then pressed continue, and I got the options, to update OS x 
or to erase and install, or archive and install...

    I didn't want to mess around , so I didn't choose any of these options 
.. How can I get to utility to change the password ? Any help is 
appreciated ..

    TIA
    Khalid
      ----- Original Message -----
      From: Esther
      To: [email protected]
      Sent: Sunday, August 23, 2009 9:57 PM
      Subject: Re: Updating Mac 10.5 (password)



      Hi,

      Daniel answered your question that the "c" key was the letter "c". 
There are various keys that you can hold down while the Mac is booting that 
determine the boot mode.  Most of these stand for modes that are easy to 
remember. "C" stands for Boot from inserted CD or DVD; the Shift key 
stands for Boot into Safe mode (a restricted access mode where you only 
bring up a subset of the operating system where audio and network 
connections are disabled -- this mode is not accessible, but certain 
problems can be fixed by just booting into this mode (without logging in), 
and then rebooting normally; "T" stands for boot into  target disk mode 
(when you connect to another Mac via a Firewire cable and use its disk to 
boot the second machine -- this no longer works with the newest MacBooks 
that have no Firewire ports; "D' stands for boot from the hard drive, etc.

      For the formal instructions see this Apple help article:

      http://docs.info.apple.com/article.html?path=Mac/10.5/en/11627.html
      (Mac OS X 10.5 Help: If you forget your Administrator Password)

      This describes the boot sequence and how to navigate to reset the 
password.   Just make sure to start up VoiceOver as your first action after 
the Mac boots from the install disc (while you hold down the "C" key.  You 
may need to use Fn-Command-F5 on the laptop instead of Command-F5.  (I 
don't remember, so you may have to try both to start up VoiceOver).  Then 
select your language, etc.

      HTH

      Cheers,

      Esther

      Dr.Khalid wrote:
      >








  

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"MacVisionaries" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/macvisionaries?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to