Begin forwarded message:

> From: Freedom Scientific Technical Support <[email protected]>
> Date: 7 May 2014 08:27:32 pm BST
> To: "'[email protected]'" <[email protected]>
> Subject: Focus 40 Blue with an iMac
> 
> Thank you for contacting  Technical Support. Before upgrading your Focus 
> braille display to have it work with your iMac, I suggest that you should try 
> removing the pairing of the Focus with the iMac, and then try to pair it 
> again. If this doesn’t work, you can download the latest Focus firmware from 
> the following location:
>  
> https://www.sendspace.com/pro/dl/48fw7b
>  
> Please use the following instructions to update the Focus Blue firmware.
>  
> Focus Blue Firmware Update Procedure
> 
> Before You Begin
> 
> Review this procedure before attempting to update your unit
> Make sure you have the supplied Focus Blue USB cable
> Press the unit's Power button and verify the current firmware version. The 
> unit's name and firmware version display when the unit turns on.
> Download the appropriate Focus Blue firmware file and copy it to a location 
> on your computer where you can easily find it later
>  
> Updating the Focus Blue Firmware
> 
>  
> Using the link above, download and save the appropriate firmware file (ZIP) 
> to a location on your computer where you can easily find it, for example, 
> your Downloads folder.
> Open the file and extract it to a folder where you can find it, for example, 
> your Downloads folder.
> Plug the braille display into your computer's USB port and wait for the unit 
> to turn on. If the Found New Hardware dialog box appears, follow the messages 
> to locate the driver.
> Run the application file (EXE) for your unit and follow the messages to 
> update the firmware.
>  
> 
> IMPORTANT: Do not disconnect the unit during the update process.
> 
>  
> 
> When the update is finished, you may receive a message telling you to close 
> and restart your screen reader before using your braille display.
>  
> To verify that the update was successful, press the unit's POWER button to 
> display firmware information.
>  
> If you have any additional questions regarding this or any other issue, 
> please don't hesitate to contact us. 
>  
> If replying to this message, Be sure to include all previous correspondence 
> pertaining to this matter so that we might better assist you.
>  
> Sincerely,
> 
> Dennis G. Godin
> Technical Support Specialist
> Freedom Scientific, Inc
> 727-803-8600
> [email protected]
> www.freedomscientific.com/support.asp
>  
> Connect with us:
>   
>                
>  

-- 
You received this message because you are subscribed to the Google Groups 
"MacVisionaries" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/macvisionaries.
For more options, visit https://groups.google.com/d/optout.

Reply via email to