Begin forwarded message:

> From: Freedom Scientific Technical Support <[email protected]>
> Date: 7 May 2014 10:26:09 pm BST
> To: "[email protected]" <[email protected]>
> Subject: RE: Focus 40 Blue with an iMac
> 
> Thank you for contacting  Technical Support. Sorry, but the only installer we 
> have is for Microsoft Windows, we do not have any Mac installer version for 
> the Focus braille display firmware. 
> 
> If you have any additional questions regarding this or any other issue, 
> please don't hesitate to contact us.  
> 
> If replying to this message, Be sure to include all previous correspondence 
> pertaining to this matter so that we might better assist you.
> 
> Sincerely,
> 
> Dennis G. Godin
> Technical Support Specialist
> Freedom Scientific, Inc
> 727-803-8600 
> [email protected]
> www.freedomscientific.com/support.asp
> 
> Connect with us:
>   
>                 
> 
> -----Original Message-----
> From: Freedom Scientific Technical Support 
> Sent: Wednesday, May 07, 2014 5:00 PM
> To: Dennis Godin
> Subject: FW: Focus 40 Blue with an iMac
> 
> 
> 
> -----Original Message-----
> From: Kawal Gucukoglu [mailto:[email protected]] 
> Sent: Wednesday, May 07, 2014 4:51 PM
> To: Freedom Scientific Technical Support
> Subject: Re: Focus 40 Blue with an iMac
> 
> Thanks for this.  Do you have a Mac installer version or can we just do this 
> using Windows?  I do have Windows as well but thought I'd ask as I wish we 
> could download all braille drivers on all computers as now we can use your 
> products on different devices and not just windows.
> 
> Kawal.
>> On 7 May 2014, at 20:27, Freedom Scientific Technical Support 
>> <[email protected]> wrote:
>> 
>> Thank you for contacting  Technical Support. Before upgrading your Focus 
>> braille display to have it work with your iMac, I suggest that you should 
>> try removing the pairing of the Focus with the iMac, and then try to pair it 
>> again. If this doesn't work, you can download the latest Focus firmware from 
>> the following location:
>> 
>> https://www.sendspace.com/pro/dl/48fw7b
>> 
>> Please use the following instructions to update the Focus Blue firmware.
>> 
>> Focus Blue Firmware Update Procedure
>> 
>> Before You Begin
>> 
>>    . Review this procedure before attempting to update your unit
>>    . Make sure you have the supplied Focus Blue USB cable
>>    . Press the unit's Power button and verify the current firmware version. 
>> The unit's name and firmware version display when the unit turns on.
>>    . Download the appropriate Focus Blue firmware file and copy it to a 
>> location on your computer where you can easily find it later
>>    .  
>> Updating the Focus Blue Firmware
>> 
>> 
>>    . Using the link above, download and save the appropriate firmware file 
>> (ZIP) to a location on your computer where you can easily find it, for 
>> example, your Downloads folder.
>>    . Open the file and extract it to a folder where you can find it, for 
>> example, your Downloads folder.
>>    . Plug the braille display into your computer's USB port and wait for the 
>> unit to turn on. If the Found New Hardware dialog box appears, follow the 
>> messages to locate the driver.
>>    . Run the application file (EXE) for your unit and follow the messages to 
>> update the firmware.
>> 
>> 
>> IMPORTANT: Do not disconnect the unit during the update process.
>> 
>> 
>> 
>>    . When the update is finished, you may receive a message telling you to 
>> close and restart your screen reader before using your braille display.
>> 
>> To verify that the update was successful, press the unit's POWER button to 
>> display firmware information.
>> 
>> If you have any additional questions regarding this or any other issue, 
>> please don't hesitate to contact us. 
>> 
>> If replying to this message, Be sure to include all previous correspondence 
>> pertaining to this matter so that we might better assist you.
>> 
>> Sincerely,
>> 
>> Dennis G. Godin
>> Technical Support Specialist
>> Freedom Scientific, Inc
>> 727-803-8600
>> [email protected]
>> www.freedomscientific.com/support.asp
>> 
>> Connect with us:
>> <image001.png>  <image002.png>
> 

-- 
You received this message because you are subscribed to the Google Groups 
"MacVisionaries" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/macvisionaries.
For more options, visit https://groups.google.com/d/optout.

Reply via email to