You'll need to add an output block to the chain. This not only lets you monitor, but you could send the audio to a different sound card, or only monitor some audio sources, or other options. Until you do that though, the record block will eat the audio and make it sound like your machine is muted. Sorry, I should have mentioned that. > On May 12, 2015, at 12:46 AM, Joshua Tubbs <[email protected]> wrote: > > Thanks for the tips, i eventually got it. Another problem came up, however. > The output mutes itself when recording. It records everything it’s supposed > to record, but in capturing app.com.speech it mutes the VoiceOver output… > Anyway to fix this? Can’t do anything without speech… > >> On May 11, 2015, at 11:15 PM, Alex Hall <[email protected] >> <mailto:[email protected]>> wrote: >> >> As I understand it, you simply need to put the four items (well, five--don't >> forget to grab VoiceOver too, so you get sounds) in a stack. That is, 1,1; >> 1,2; 1,3; and so on. They should all be on the same X coordinate. Then, >> place your record block at something like 5,3, which should be a flat enough >> angle for all the sources to connect. Remember that the key is to have the >> angle between any input and any output be less than 45 degrees from the X >> axis; anything more and it won't connect. Yes, you could use decimals if you >> wanted to, but you shouldn't have to if I'm picturing this setup correctly. >>> On May 11, 2015, at 10:34 PM, Joshua Tubbs <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> Hi all, >>> So far I’m slowly getting the hang of this Audio Hijack graph/grid. It’s >>> similar to the Union/intersection stuff I did in Math that I just finished >>> up this semester. >>> In any case, I wanted to do an Applevis review and I have the following: >>> Mic at 1/1. >>> VoiceOver right under it at 1/2. >>> Com.apple.speech at 3/2. >>> and the app I want to review at 4/2. >>> The Mic and VoiceOver have a connection to MP3, but that means only my Mic >>> and VOiceOver sounds will get recorded. I want to connect com.apple.speech >>> and the app to MP3, but I’m having trouble doing so. Either they overlap >>> and Audio Hijack prevents it, or it is too far from MP3 to make a >>> connection to it. Should I make another recorder block to solve this >>> problem? I want them all to go to the same file… >>> >>> I recognize that I may have more room to work with putting the blocks on >>> decimals, but that leaves me a bit more confused as to where to put the >>> extra blocks to make the connection to MP3. >>> Is it possible to not move blocks to a decimal for four-five blocks? >>> Thanks everyone. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "MacVisionaries" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected] >>> <mailto:[email protected]>. >>> To post to this group, send email to [email protected] >>> <mailto:[email protected]>. >>> Visit this group at http://groups.google.com/group/macvisionaries >>> <http://groups.google.com/group/macvisionaries>. >>> For more options, visit https://groups.google.com/d/optout >>> <https://groups.google.com/d/optout>. >> >> >> -- >> Have a great day, >> Alex Hall >> [email protected] <mailto:[email protected]> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "MacVisionaries" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] >> <mailto:[email protected]>. >> To post to this group, send email to [email protected] >> <mailto:[email protected]>. >> Visit this group at http://groups.google.com/group/macvisionaries >> <http://groups.google.com/group/macvisionaries>. >> For more options, visit https://groups.google.com/d/optout >> <https://groups.google.com/d/optout>. > > > -- > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To post to this group, send email to [email protected] > <mailto:[email protected]>. > Visit this group at http://groups.google.com/group/macvisionaries > <http://groups.google.com/group/macvisionaries>. > For more options, visit https://groups.google.com/d/optout > <https://groups.google.com/d/optout>.
-- Have a great day, Alex Hall [email protected] -- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/macvisionaries. For more options, visit https://groups.google.com/d/optout.
