yes, the old and true version worked. I find the newer version only works if at the time of the drag command, both the source and target are visible on screen. There is a VO command to drag to a hot-spot, and I have not tried that and perhaps it works better.
In terms of doing things the other way with vo-command-shift-space yes, this worked the only issue there in 10.11.5 was that VO VO-F5 did not confirm that the mouse was over the place I wanted, so I got confused. Best wishes, Jonathan > On Jul 23, 2016, at 7:35 PM, Tim Kilburn <[email protected]> wrote: > > Hi Jonathan, > > Interesting. I was doing this with 10.11.6. I find the VO-comma/Vo-period > method unreliable, but the old fashioned Drag & Drop works every time. Did > it work for you? I was a little confused by your response knowing whether it > worked, or whether you were just having issues with it announcing properly. > Sorry. Regarding if it its announcing properly, do you have VO set to > announce what's under the Mouse Cursor? That setting is in the VO Utility, > Verbosity in the Announcements tab. I have mine checked and the delay set to > zero. > > Later... > > > Later... > > Tim Kilburn > Fort McMurray, AB Canada > > On Jul 23, 2016, at 12:30, Jonathan Cohn <[email protected]> wrote: > > My response in-line to your two possibilities, I am doing this with 10.11.5 > > > > Best wishes, > > Jonathan > > > >> On Jul 23, 2016, at 11:32 AM, Tim Kilburn <[email protected]> wrote: >> >> Hi, >> >> This process works in El Capitan. Using VO-comma and VO-period will work if >> you're only moving it up or down within the visible networks. Once the >> original network goes out of the scroll list, VO can't seem to handle it. >> Using the old fashioned Drag & Drop method will work though. So, > > 1. Interact with table vo-, says not draggable. Interact with the name of the > network, and vo-comma still says not draggable. > >> for example, I have a network named Chateau Lacombe way down my list and I >> wish to move it much higher in the priority, then I'd navigate to the >> Chateau Lacombe network (Press VO-cmd-f5 if your cursors aren't following >> each other), then VO-shift-cmd-space to activate the mouse down action, then >> VO-up to the item I'd like it to be above, press VO-cmd-f5 to route the >> mouse to the VO-cursor and finally press VO-shift-cmd-space to drop it. >> Often, you need to use the VO-cmd-f5 after the drag as I've found that the >> cursors don't follow I was able to drag items this way. Though the vo-F5 >> would not verify that I was in the right place. One thing I did find to >> help, was to not have the item selected before doing the mouse down, in this >> way VO would indicate that the appropriate item was selected. > > > -- > The following information is important for all members of the Mac Visionaries > list. > > If you have any questions or concerns about the running of this list, or if > you feel that a member's post is inappropriate, please contact the owners or > moderators directly rather than posting on the list itself. > > Your Mac Visionaries list moderator is Mark Taylor and your owner is Cara > Quinn - you can reach Cara at [email protected] > > The archives for this list can be searched at: > http://www.mail-archive.com/[email protected]/ > --- > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/macvisionaries. > For more options, visit https://groups.google.com/d/optout. > > -- > The following information is important for all members of the Mac Visionaries > list. > > If you have any questions or concerns about the running of this list, or if > you feel that a member's post is inappropriate, please contact the owners or > moderators directly rather than posting on the list itself. > > Your Mac Visionaries list moderator is Mark Taylor and your owner is Cara > Quinn - you can reach Cara at [email protected] > > The archives for this list can be searched at: > http://www.mail-archive.com/[email protected]/ > --- > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/macvisionaries. > For more options, visit https://groups.google.com/d/optout. -- The following information is important for all members of the Mac Visionaries list. If you have any questions or concerns about the running of this list, or if you feel that a member's post is inappropriate, please contact the owners or moderators directly rather than posting on the list itself. Your Mac Visionaries list moderator is Mark Taylor and your owner is Cara Quinn - you can reach Cara at [email protected] The archives for this list can be searched at: http://www.mail-archive.com/[email protected]/ --- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/macvisionaries. For more options, visit https://groups.google.com/d/optout.
