No, not if you go to effects/amplify. IF you type -9 and check the fade box,
it will in fact fade up from -9 rather than fade down to it. However, I found
the solution. Here's what I did.
1. Make a selection.
2. Go to effects/fade submenu/ramp...
3. Choose your beginning percentage. 100 percent is the 0DB normal default
audio.
4. Now, choose your ending percentage. 25 percent is usually good.
5. Press okay.
6. Now, move out to the end of the selection by pressing right arrow and set a
marker by pressing p.
7. Next, paste over what you want your voice over to say. This, of course,
assumes that you've recorded your voice over and put it on the clip board
before you went to ramp for the first time.
8. Now, undo that paste over. This will take out the actual voice over but
keep the selection which that paste made.
9. Now, go back to effects/fade submenu/ramp...and make sure that your
beginning percentage is equal to your ending percentage. This will have the
effect of keeping your level down for the selection.
10. Now, repeat the paste over.
11. Now, go back to ramp...and this time, choose your beginning percentage as
your lowest level but set your ending percentage back to 100. Press Okay.
That will do it.
That sounds like a lot of work when you read it like that, but,
actually, it's really not that hard.
Sincerely,
The Constantly Barefooted Ray!!!
E-Mail:
rforetjr at comcast dot net
Skype Name:
barefootedray
On Jul 14, 2010, at 2:10 PM, Sarah Alawami wrote:
> I got it to faid down actually. Just type -9 and it will drop. Now I think if
> you select a portion it will fade down using that selection.
>
> S
> On Jul 14, 2010, at 7:10 AM, Ray Foret Jr wrote:
>
>> Anybody know how to cause Amadeus pro to fade signal down to say -9DB
>> instead of abruptly cutting down to that level? The fading in the amplify
>> function only fades up and not down. Thanks.
>>
>>
>> Sincerely,
>> The Constantly Barefooted Ray!!!
>>
>> E-Mail:
>> rforetjr at comcast dot net
>> Skype Name:
>> barefootedray
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "MacVisionaries" group.
>> To post to this group, send email to [email protected].
>> To unsubscribe from this group, send email to
>> [email protected].
>> For more options, visit this group at
>> http://groups.google.com/group/macvisionaries?hl=en.
>>
>
> --
> You received this message because you are subscribed to the Google Groups
> "MacVisionaries" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to
> [email protected].
> For more options, visit this group at
> http://groups.google.com/group/macvisionaries?hl=en.
>
--
You received this message because you are subscribed to the Google Groups
"MacVisionaries" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/macvisionaries?hl=en.
