David, You need to get the Mac to pull its IP from the Linksys router. You need to have all the devices on your network pulling their IP from one router and you should not have the Mac pulling an IP from the AirPort. The AirPOrt could be connected to the router via the ethernet connection and put into bridge mode. That would make things much easier. success in getting these guys talking to each other and I would recommend you put everyone on the same network. I'm sure smarter folks will have other ideas, but you need to get everyone on the 10. or 192 addressing scheme unless you want to create On Feb 23, 2012, at 1:56 PM, Deamon David wrote:
> Hi. > Hope someone can help me with this. > I've searched the internet, but haven't found any good answers... > I have a Mac with Lion wich I will use TimeMachine for backing up to > my iOmega Storcenter 2-200. > The Mac is connected via WiFi to an AirPort Express, wich again are > connected to a Linksys Router via cable. The iOmega box are also > connected to the router via cable. > Right now, the Mac gets its IP from the AirPort, and has an IP of > 10.x.x.x. > The AirPort has an IP on the router of (I guess it was) 192.168.1.100 > and the iOmega has the IP 192.168.1.115. > The AirPort is connected to my stereo so I can use AirPlay. Therefor > the Mac is connected that way. > Does anyone have an idea to configure this to work fast and easy? > Best regards David > > -- > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. > -- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
