Sounds like the mac is at least recognizing it, if that didn't work, nothing else would either. If you go in to disk utility, what disks and drives show up in the table? On Oct 9, 2012, at 5:49 PM, Mark Baxter wrote:
> When I use the system information utility (I don't have a system profiler) > This is what I *THINK* is my USB card reader: > Mass Storage Device: > > Product ID: 0x6366 > Vendor ID: 0x058f (Alcor Micro, Corp.) > Version: 1.00 > Serial Number: 058F63666471 > Speed: Up to 480 Mb/sec > Manufacturer: Generic > Location ID: 0x26200000 / 2 > Current Available (mA): 500 > Current Required (mA): 100 > > However, I see no way to make id *do* anything like format the card for > example. What the heck do I have to do to work with this reader? > > > • Mark BurningHawk Baxter > • AIM, Skype and Twitter: BurningHawk1969 > • MSN: [email protected] > • My home page: > • http://MarkBurningHawk.net/ > > > -- > You received this message because you are subscribed to the Google Groups > "MacVisionaries" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/macvisionaries?hl=en. -- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/macvisionaries?hl=en.
