Dear listers, I'm helping someone to set up their time capsule and all is fine, except for one thing. When I enter port mappings and save, the time capsule reboots as usual, but then when checking back on the port settings I made, the text fields for the port numbers are empty. In other words, the port mapping entry in time capsule exists, but it doesn't work when testing. So, when going back into time capsule settings and editing the port mapping, the fields that should still contain the port numbers to map, are empty. After editing, this is what the dialog looks like:
Firewall Entry Type: IPv4 Port Mapping, dimmed pop up button. Description: for serv-u passive, port 33250. Public UDP Ports: edit text, blank. Public TCP Ports: edit text blank. Private IP Address: 10.0.1.250, 250 is selected, edit text. Private UDP Ports: edit text, blank. Private TCP Ports: edit text, blank. Cancel, button. Save, dimmed default button. So as you can see, where I entered the tcp port numbers, in both fields it is 33250, the values vanished after the save and reboot on time capsule. Anyone an idea what is going on here? Does any of you have working port mappings with a time capsule, while having the router mode set to dhcp plus nat? Is there a work around for this flaw? Paul. -- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/macvisionaries?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
