Hi guys, I have a situation and any help would be greatly appreciated. I have a Romeo Pro 50, on a Mac mini running Mountainlion. I am using Louis Braille the free translator, and a usb to serial or parallel not sure which one, I think it's the latter, anyway. I have the printer connected, and know the printer is communicating with the mac. I tried to add printer and picked something and it shot out a ton of gibberish so I know that even though that wasn't the right driver it does communicate with the connector and the Mac. We have migrated from windows here at work, and I really don't want to have to go back and use duxbury and windows for just this, if possible. Is there a driver, that will work to make the Romeo pro 50 single-sided printer work with the mac as an embossing option under Louis braille, or am I totally missing something. I know that there are no braille translation solutions for the mac outside of the Louis braille and not even sure it is still being supported even though it is an awesome addition. Anyway, if you could help that would be great. Let me know what driver if any will work, or if there is a programmer out there that really wants to tackle something I don't care what the driver looks like as long as it runs. Thanks for any help you can give. Take care and talk to you soon.
-- You received this message because you are subscribed to the Google Groups "MacVisionaries" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/macvisionaries. For more options, visit https://groups.google.com/groups/opt_out.
