#417: ps-poll packet with a Spectralink i640 phone
-----------------------------------+----------------------------------------
 Reporter:  [EMAIL PROTECTED]        |            Owner:       
     Type:  defect                 |           Status:  new  
 Priority:  major                  |        Milestone:       
Component:  madwifi: 802.11 stack  |          Version:  trunk
 Keywords:                         |   Patch_attached:  0    
-----------------------------------+----------------------------------------
 I have a Spectralink i640 phone which connects fine to ap mode VAP with
 128bit WEP...

  auto ath015[[BR]]
  iface ath015 inet static[[BR]]
  address 0.0.0.0[[BR]]
  netmask 255.255.255.255[[BR]]
  network 0.0.0.0[[BR]]
  broadcast 255.255.255.255[[BR]]
  mtu 1504[[BR]]
  pre-up /usr/bin/wlanconfig ath015 create wlandev wifi0 wlanmode ap[[BR]]
  up /usr/sbin/brctl addif br15 ath015[[BR]]
  up /sbin/iwpriv ath015 authmode 2[[BR]]
  down /usr/sbin/brctl delif br15 ath015[[BR]]
  post-down /usr/bin/wlanconfig ath015 destroy[[BR]]
  wireless-essid VLAN_VoIP[[BR]]
  wireless-key1 00000000000000000000000000[[BR]]
  wireless-key2 00000000000000000000000000[[BR]]
  wireless-key3 00000000000000000000000000[[BR]]
  wireless-key4 00000000000000000000000000[[BR]]
  wireless-defaultkey 1[[BR]]

 {{{
 ath015    IEEE 802.11g  ESSID:"VLAN_VoIP"
           Mode:Master  Frequency:2.412 GHz  Access Point:
 0E:02:6F:3E:1C:94
           Bit Rate:0 kb/s   Tx-Power:19 dBm   Sensitivity=0/3
           Retry:off   RTS thr:off   Fragment thr:off
           Encryption key:A012-B5D9-6696-BB01-2963-F0FD-FF   Security
 mode:restricted
           Power Management:off
           Link Quality=0/94  Signal level=-95 dBm  Noise level=-95 dBm
           Rx invalid nwid:656  Rx invalid crypt:0  Rx invalid frag:0
           Tx excessive retries:0  Invalid misc:0   Missed beacon:0
 }}}
 I am able to make calls, utilize PTT (Push To Talk) as long as I do it
 before the Spectralink sends the ps-poll packet.  As soon as the
 Spectralink phones sends the ps-poll packet, communication to/from the
 device fails.

 This works fine with a Cisco AP.  I can provide ethereal captures using a
 monitor mode VAP for both the Cisco and the madwifi AP.

-- 
Ticket URL: <http://madwifi.org/ticket/417>
MadWifi <http://madwifi.org/>
Multiband Atheros Driver for Wireless Fidelity

Reply via email to