#510: txpower issue ....
----------------------------------------+-----------------------------------
Reporter: [EMAIL PROTECTED] | Owner: dyqith
Type: defect | Status: assigned
Priority: major | Milestone:
Component: madwifi: driver | Version:
Resolution: | Keywords:
Patch_attached: 0 |
----------------------------------------+-----------------------------------
Comment (by [EMAIL PROTECTED]):
Yes device is up
when i down interface and do:
iwconfig ath0 txpower 17
iwconfig shows:
Bit Rate:24 Mb/s Tx-Power=17 dBm Sensitivity=0/3
but if i do ifconfig ath0 up
iwconfig :
Bit Rate:24 Mb/s Tx-Power=16 dBm Sensitivity=0/3
and if i do :
ifconfig ath0 up
iwconfig ath0 essid wdsik
iwconfig ath0 rate 24M
iwconfig ath0 txpower 17
iwconfig shows:
Bit Rate:24 Mb/s Tx-Power=16 dBm Sensitivity=0/3
and :
ifconfig ath0 up
iwconfig ath0 essid wdsik rate 24M txpower 17
iwconfig shows:
Bit Rate:24 Mb/s Tx-Power=16 dBm Sensitivity=0/3
Only when interface is down i can change txpower but when i up interface
then txpower is changing to 16dbm
And another try with diff.. config:
cm9 card:
mode 11b
ifconfig ath0 up
iwconfig ath0 essid test1
iwconfig ath0 txpower 19
iwconfig shows:
Bit Rate:0 Mb/s Tx-Power=17 dBm Sensitivity=0/3
but when i change mode from 11b to 11g:
cm9 card:
mode 11g
ifconfig ath0 up
iwconfig ath0 essid test1
iwconfig ath0 txpower 19
iwconfig shows:
Bit Rate:0 Mb/s Tx-Power=19 dBm Sensitivity=0/3
i try with wireless-tools v17 , v18 , v19 , v20 , v21
with the latest madwifi-ng
And every time i have the same results:
--
Ticket URL: <http://madwifi.org/ticket/510>
MadWifi <http://madwifi.org/>
Multiband Atheros Driver for Wireless Fidelity
