#674: Bridging ath0 interface create packet loss
----------------------------------+-----------------------------------------
Reporter: anonymous | Owner:
Type: defect | Status: new
Priority: major | Milestone:
Component: madwifi: driver | Version: trunk
Resolution: | Keywords: bridge
Patch_attached: 0 |
----------------------------------+-----------------------------------------
Comment (by p0g0):
tried the same hardware with svn 1453 on the station- has the same issues
when I enable the bridge. Wonder if it's the AP (it's rev 1454).
Also tried:
ifconfig eth0 0.0.0.0 up
ifconfig ath0 0.0.0.0 up (after setting all the
wlanconfig/iwpriv/iwconfig & ath0 was associated)
brctl addbr br_court
brctl addif br_court eth0
brctl addif br_court ath0
ifconfig br_court 192.168.4.11 netmask 255.255.255.0 up
the bridge comes up (as usuaal), the two ports enter learning stat, then
the ath0 port starts to cycle as described above. (The difference in this
test is the 0.0.0.0 ip assignments to eth0 & atho)
--
Ticket URL: <http://madwifi.org/ticket/674>
MadWifi <http://madwifi.org/>
Multiband Atheros Driver for Wireless Fidelity
_______________________________________________
Madwifi-tickets mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/madwifi-tickets
