#1172: interface is not brought up from ifconfig
--------------------------------------------+-------------------------------
Reporter: [EMAIL PROTECTED] | Owner: dwhedon
Type: defect | Status: new
Priority: major | Milestone:
Component: dadwifi | Version: dadwifi-branch
Resolution: | Keywords:
Patch_attached: 0 |
--------------------------------------------+-------------------------------
Old description:
> Using dadwifi revision 2167 with the lastest version of wireless-dev 2.6
> .21-r1 doesn't let the ifconfig bring up the interface, nor it is
> recognized by networkmanager, the card is an ubiquiti scr, I'll attach
> both lspci and dmesg of when I insert the card in:
> lspci
> 00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
>
> 00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev f6)
>
> 00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
>
> 00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
>
> 00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
>
> 00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2)
>
> 00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio
> (rev a2)
>
> 00:06.1 Modem: nVidia Corporation nForce3 Audio (rev a2)
>
> 00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5)
>
> 00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2)
>
> 00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4)
>
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
>
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Address Map
>
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> DRAM Controller
>
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
>
> 01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility
> Radeon 9600 M10]
>
> 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
> Gigabit Ethernet Controller (rev 13)
> 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
>
> 02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
>
> 02:01.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller
> (rev 04)
>
> 02:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g
> Wireless LAN Controller (rev 03)
>
> 04:00.0 Ethernet controller: Atheros Communications, Inc. AR5212
> 802.11abg NIC (rev 01)
>
> dmesg:
> [ 174.259778] pccard: CardBus card inserted into slot 1
>
> [ 174.283246] ath_hal: module license 'Proprietary' taints kernel.
>
> [ 174.284724] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112,
> RF2413, RF5413)
>
> [ 174.286926] ath_pci: 0.9.4.5-dadwifi (svn r2166)
>
> [ 174.287511] PCI: Enabling device 0000:04:00.0 (0000 -> 0002)
>
> [ 174.287571] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNKC] -> GSI
> 11 (level, low) -> IRQ 11
>
> [ 174.508574] wmaster0: Selected rate control algorithm 'simple'
>
> [ 174.509816] wiphy1: mac 5.9 phy 4.3 radio 3.6
>
> [ 174.509826] wiphy1: Use hw queue 8 for CAB traffic
>
> [ 174.509828] wiphy1: Use hw queue 9 for beacons
>
> [ 174.509832] wiphy1: Atheros 5212: mem=0xf9600000, irq=11
>
> [ 177.771440] wlan0_rename: starting scan
>
> [ 178.105848] wlan0_rename: scan completed
>
> [ 180.038531] wiphy1: unable to reset hardware: '' (HAL status 0) (freq
> 0 flags 0x0)
>
> the last line is when I try to bring up the interface with #ifconfig
> wlan0
> I've also tried dadwifi-openhal and I have the same problem
>
> if you need anything else let me know...
>
> Luca Palermo
> Sabayonlinux development
New description:
Using dadwifi revision 2167 with the lastest version of wireless-dev 2.6
.21-r1 doesn't let the ifconfig bring up the interface, nor it is
recognized by networkmanager, the card is an ubiquiti scr, I'll attach
both lspci and dmesg of when I insert the card in:
{{{
lspci:
00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev f6)
00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev
a2)
00:06.1 Modem: nVidia Corporation nForce3 Audio (rev a2)
00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5)
00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility
Radeon 9600 M10]
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit
Ethernet Controller (rev 13)
02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
02:01.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller
(rev 04)
02:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g
Wireless LAN Controller (rev 03)
04:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg
NIC (rev 01)
dmesg:
[ 174.259778] pccard: CardBus card inserted into slot 1
[ 174.283246] ath_hal: module license 'Proprietary' taints kernel.
[ 174.284724] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112,
RF2413, RF5413)
[ 174.286926] ath_pci: 0.9.4.5-dadwifi (svn r2166)
[ 174.287511] PCI: Enabling device 0000:04:00.0 (0000 -> 0002)
[ 174.287571] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNKC] -> GSI
11 (level, low) -> IRQ 11
[ 174.508574] wmaster0: Selected rate control algorithm 'simple'
[ 174.509816] wiphy1: mac 5.9 phy 4.3 radio 3.6
[ 174.509826] wiphy1: Use hw queue 8 for CAB traffic
[ 174.509828] wiphy1: Use hw queue 9 for beacons
[ 174.509832] wiphy1: Atheros 5212: mem=0xf9600000, irq=11
[ 177.771440] wlan0_rename: starting scan
[ 178.105848] wlan0_rename: scan completed
[ 180.038531] wiphy1: unable to reset hardware: '' (HAL status 0) (freq 0
flags 0x0)
}}}
the last line is when I try to bring up the interface with #ifconfig wlan0
I've also tried dadwifi-openhal and I have the same problem
if you need anything else let me know...
Luca Palermo
Sabayonlinux development
Comment (by mrenzmann):
dadwifi and dadwifi-openhal are currently broken. See also
[http://article.gmane.org/gmane.linux.drivers.madwifi.devel/3899 this
posting] from proski on madwifi-devel.
--
Ticket URL: <http://madwifi.org/ticket/1172>
MadWifi <http://madwifi.org/>
Multiband Atheros Driver for Wireless Fidelity-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Madwifi-tickets mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/madwifi-tickets
