#1954: madwifi doesn't cooperate with xsupplicant
-----------------------------+----------------------------------------------
Reporter: [EMAIL PROTECTED] | Type: defect
Status: new | Priority: blocker
Component: madwifi: driver | Version: trunk
Keywords: | Patch_attached: 0
-----------------------------+----------------------------------------------
Hello,
I use xsupplicant 1.2.4 from Debian testing.
I use svn version 3659.
{{{
Card identify itself fine:
ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112,
RF2413, RF5413, RF2133)
wlan: svn r3659
ath_pci: svn r3659
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKE] -> GSI 11 (level, low)
-> IRQ 11
MadWifi: ath_attach: HAL managed transmit power control (TPC) disabled.
MadWifi: ath_attach: Interference mitigation is supported. Currently
disabled.
MadWifi: ath_attach: Switching rfkill capability off.
ath_rate_sample: 1.2 (svn r3659)
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: Atheros AR5414 chip found (MAC 10.5, PHY SChip 6.1, Radio 6.3)
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 4 for XR traffic
wifi0: Use hw queue 7 for UAPSD traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
ath_pci: wifi0: Atheros 5212: mem=0xe0200000, irq=11
a
}}}
But when I call xsupplicant I getts into dmesg:
{{{
ath0: unknown pairwise cipher 0
ath0: unknown group cipher 0
}}}
xsupplicant informs:
{{{
notas:/usr/include# ifconfig ath0 up; xsupplicant -c /home/cijoml/work
/wpa-psk-example.conf -i ath0 -f -w
Card reported capabilitites : WEP40 WEP104 WPA WPA2 TKIP CCMPNo
configuration information for network "(null)" found. Using default.
Your card is currently set for wireless network "". Looking for a config.
Couldn't build a config for ESSID !
Scanning for wireless networks ...
CIJOML-3 is WPA/WPA2 capable. WPA/WPA2 is enabled on this connection.
Error changing setting for 'pairwise cipher'! It is possible that your
driver does not support the needed functionality.
Couldn't set pairwise cipher.
Error changing setting for 'group cipher'! It is possible that your driver
does not support the needed functionality.
Couldn't set group cipher.
}}}
I can't use wpa_supplicant because bug
at hostap.epitest.fi/bugz/show_bug.cgi?id=265
Marking blocker, because encryption handshake doesn't work for me...
Thanks a lot for help!
Michal
--
Ticket URL: <http://madwifi.org/ticket/1954>
madwifi.org <http://madwifi.org/>
Multiband Atheros Driver for Wireless Fidelity
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Madwifi-tickets mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/madwifi-tickets
