#2043: Speed cut to 1/3 between svn3401 and svn3545
---------------------------------+------------------------------------------
      Reporter:  anonymous       |       Owner:       
          Type:  defect          |      Status:  new  
      Priority:  minor           |   Milestone:       
     Component:  madwifi: other  |     Version:  trunk
    Resolution:                  |    Keywords:       
Patch_attached:  0               |  
---------------------------------+------------------------------------------
Old description:

> I've got an AR5418 chip in a T60 laptop connecting to a Dlink DIR-655
> Hardware version A2, Firmware version 1.11. As I understand it, these
> both use the AR5008 series chip sets.
>
> Using the driver in svn3401, I am consistenly able to get ~2MB/s up and
> down, however going to svn3545 and higher (including the latest svn3766)
> this is cut down to about 600KB/s. My tests consist of using scp to
> transfer a single large tar file to and from a machine connected to one
> of the wired Ethernet ports on the router. I'm connecting using
> WPA2-Personal with CCMP encryption.
>
> Please let me know if there is any additional debugging I should do.
>
> This is my card according to lspci:
>
> 03:00.0 Network controller: Atheros Communications Inc. AR5418 802.11abgn
> Wireless PCI Express Adapter (rev 01)
>         Subsystem: Atheros Communications Inc. Device 0033
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR+ FastB2B- DisINTx-
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 17
>         Region 0: Memory at edf00000 (64-bit, non-prefetchable)
> [size=64K]
>         Capabilities: [40] Power Management version 2
>                 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA
> PME(D0+,D1+,D2-,D3hot+,D3cold-)
>                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [50] Message Signalled Interrupts: Mask- 64bit-
> Queue=0/0 Enable-
>                 Address: 00000000  Data: 0000
>         Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
>                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
> <512ns, L1 <64us
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 128 bytes, MaxReadReq 512 bytes
>                 DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
>                 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
> Latency L0 <512ns, L1 <64us
>                         ClockPM- Suprise- LLActRep- BwNot-
>                 LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled-
> Retrain- CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
>         Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
>                 Vector table: BAR=0 offset=00000000
>                 PBA: BAR=0 offset=00000000
>         Capabilities: [100] Advanced Error Reporting <?>
>         Capabilities: [140] Virtual Channel <?>
>         Kernel driver in use: ath_pci
>         Kernel modules: ath_pci

New description:

 I've got an AR5418 chip in a T60 laptop connecting to a Dlink DIR-655
 Hardware version A2, Firmware version 1.11. As I understand it, these both
 use the AR5008 series chip sets.

 Using the driver in svn3401, I am consistenly able to get ~2MB/s up and
 down, however going to svn3545 and higher (including the latest svn3766)
 this is cut down to about 600KB/s. My tests consist of using scp to
 transfer a single large tar file to and from a machine connected to one of
 the wired Ethernet ports on the router. I'm connecting using WPA2-Personal
 with CCMP encryption.

 Please let me know if there is any additional debugging I should do.

 This is my card according to lspci:
 {{{
 03:00.0 Network controller: Atheros Communications Inc. AR5418 802.11abgn
 Wireless PCI Express Adapter (rev 01)
         Subsystem: Atheros Communications Inc. Device 0033
         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
 ParErr- Stepping- SERR+ FastB2B- DisINTx-
         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
 <TAbort- <MAbort- >SERR- <PERR- INTx-
         Latency: 0, Cache Line Size: 64 bytes
         Interrupt: pin A routed to IRQ 17
         Region 0: Memory at edf00000 (64-bit, non-prefetchable) [size=64K]
         Capabilities: [40] Power Management version 2
                 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA
 PME(D0+,D1+,D2-,D3hot+,D3cold-)
                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-
         Capabilities: [50] Message Signalled Interrupts: Mask- 64bit-
 Queue=0/0 Enable-
                 Address: 00000000  Data: 0000
         Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
                 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
 <512ns, L1 <64us
                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
 Unsupported-
                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                         MaxPayload 128 bytes, MaxReadReq 512 bytes
                 DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
 TransPend-
                 LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1,
 Latency L0 <512ns, L1 <64us
                         ClockPM- Suprise- LLActRep- BwNot-
                 LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled-
 Retrain- CommClk+
                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                 LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
 DLActive- BWMgmt- ABWMgmt-
         Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
                 Vector table: BAR=0 offset=00000000
                 PBA: BAR=0 offset=00000000
         Capabilities: [100] Advanced Error Reporting <?>
         Capabilities: [140] Virtual Channel <?>
         Kernel driver in use: ath_pci
         Kernel modules: ath_pci
 }}}

-- 
Ticket URL: <https://madwifi.org/ticket/2043#comment:1>
madwifi.org <http://madwifi.org/>
Multiband Atheros Driver for Wireless Fidelity
-------------------------------------------------------------------------
Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW!
Studies have shown that voting for your favorite open source project,
along with a healthy diet, reduces your potential for chronic lameness
and boredom. Vote Now at http://www.sourceforge.net/community/cca08
_______________________________________________
Madwifi-tickets mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/madwifi-tickets

Reply via email to