#2115: new 20080815 hal doesn't correctly set tx power on Ubiquiti XR2 --------------------------------------+------------------------------------- Reporter: [EMAIL PROTECTED] | Type: defect Status: new | Priority: major Component: madwifi: HAL | Version: trunk Keywords: XR2 power setting broken | Patch_attached: 0 Pending: 0 | --------------------------------------+------------------------------------- I've got a power meter and I measured the peak output power of a Ubiquiti XR2 card using the HAL provided by Ubiquiti (ubnt-hal-0.7.379), and the peak output power was measured to be 1.1W. I've talked to Mike Ford at Ubiquiti and verified that this output was correct / expected.
Using the new 20080815 HAL peak output power on the same XR2 appears to be only around 340mW .. this is substantially lower than even a Ubiquiti SR2 card, where I've measured peak output power at 480mW using this new 20080815 HAL .. In the past I've noticed that with 0.9.30.13 hal, power setting is similarly broken on XR2, XR5, and XR9. Andrew -- Ticket URL: <http://madwifi.org/ticket/2115> madwifi.org <http://madwifi.org/> Multiband Atheros Driver for Wireless Fidelity ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Madwifi-tickets mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/madwifi-tickets
