Jac-
Yes, I should have mentioned I've got the ext2 module loaded. I can mount an ext2 partition on an 512MB MMC card fine, but the 2GB card fails.
I've also messed around with the geometry of the card itself, trying everything from 255H/63S/253C to 65H/62S/1012C but still no joy.
Brad.
On 6/20/06, Jac Kersing <[EMAIL PROTECTED]> wrote:
On Tue, 20 Jun 2006, Brad Burleson wrote:
> ext2. Attempting to mount the ext2 filesystem after boot gives:
>
> # mount /dev/mmcblk0p2 /mnt
> mount: Mounting /dev/mmcblk0p2 on /mnt failed: invalid argument
>
> followed by the above FAT/VFS error messages.
Have you checked if the kernel knows about ext2? (cat /proc/filesystems)
If ext2 is not listed (and is not by default on the BETA) you might want
to load the module first :-) (
insmod /mnt/initfs/lib/modules/2.6.16-omap1/ext2.ko )
Best regards,
Jac
---
Jac Kersing Technical Consultant The-Box Development
[EMAIL PROTECTED] CISSP http://www.the-box.com
_______________________________________________ maemo-developers mailing list [email protected] https://maemo.org/mailman/listinfo/maemo-developers
