:-/
certainly not completing the flashing doesn't help; have you tried
without using any usb hub?

If it still doesn't work, then  it's probably better to contact service.

cheers, igor

>-----Original Message-----
>From: [EMAIL PROTECTED] 
>[mailto:[EMAIL PROTECTED] On Behalf Of ext Pedro Ayala
>Sent: 21 February 2006 11:37
>To: maemo-users@maemo.org
>Subject: Re: [maemo-users] stripes in the screen
>
>A full nokia striped one picture:
>
>http://flickr.com/photos/[EMAIL PROTECTED]/102542049
>
>
>On 2/21/06, Pedro Ayala <[EMAIL PROTECTED]> wrote:
>
>       Hi,
>       
>       sadly I tried to reflash for two times and allways the 
>same error:
>       
>       ....
>       100% (77 of 77 kB, avg. 656 kB/s)
>       Flashing X-Loader... done.
>       Sending kernel image (1447 kB)...
>       100% (1447 of 1447 kB, avg. 788 kB/s) 
>       Flashing kernel... done.
>       Sending initfs image (1544 kB)...
>       100% (1544 of 1544 kB, avg. 731 kB/s)
>       Flashing initfs... done.
>       Sending and flashing rootfs image (57472 kB)...
>        85% (49024 of 57472 kB, 614 kB/s) 
>       Write failed after 50200576 bytes
>       usb_bulk_write: Broken pipe
>       
>       With the latest firmware. And the stripes are still there...
>       
>       http://flickr.com/photos/[EMAIL PROTECTED]/102537742/ 
><http://flickr.com/photos/[EMAIL PROTECTED]/102537742/> 
>       http://flickr.com/photos/[EMAIL PROTECTED]/102537741
>       
>       when you toutch the screen it changes a little bit, 
>indeed you can hear the nokia song... 
>       
>       
>       
>       
>       
>       On 2/21/06, [EMAIL PROTECTED] < 
>[EMAIL PROTECTED]> wrote: 
>
>               Hi,
>               certainly you could try reflashing with an 
>official image.
>               If the stripes don't go away, please describe 
>them a bit more 
>               accurately.
>               it might be that it broke :-/
>               But first try to flash it yourself: that's the 
>first thing that
>               technical
>               support would ask you to do if you were to call them.
>               
>               cheers, igor
>               
>               >-----Original Message----- 
>               >From: [EMAIL PROTECTED]
>               >[mailto: [EMAIL PROTECTED] 
><mailto:[EMAIL PROTECTED]> ] On Behalf Of ext Pedro Ayala
>               >Sent: 21 February 2006 08:49
>               >To: List: maemo-users
>               >Subject: [maemo-users] stripes in the screen
>               >
>               >Hi All,
>               >
>               >sorry to botther you as this is not really a 
>develpment question.
>               >
>               >Last friday my brother bought an unit and I 
>put it in md mode
>               >change it for gainroot without md, and go back 
>to production mode.
>               >Everything went ok.
>               >
>               >Yesterday he ran out of battery and when he 
>started to charge 
>               >it turned it on, and then some stripes 
>appeared in the screen,
>               >and it didn't work at all.
>               >
>               >Someone had this issue? could I solve it reflashing?
>               >
>               >Thanks
>               >
>               >--
>               >Pedro A. 
>               >Linux User: #199452
>               >
>               
>
>
>
>
>       -- 
>       
>       Pedro A.
>       Linux User: #199452 
>
>
>
>
>--
>Pedro A.
>Linux User: #199452 
>
_______________________________________________
maemo-users mailing list
maemo-users@maemo.org
https://maemo.org/mailman/listinfo/maemo-users

Reply via email to