2014-02-11 19:48 GMT+01:00 Sicelo <absi...@gmail.com>: > I need to connect to an enterprise network requiring the use of > PEAP+MSCHAPv2. Clients do not need to have a certificate installed. > Authentication is via domain username and password. I have tried all the > options suggested on talk.maemo.org, and still no luck. Syslog always says > 'eap authentication failed.' My username works perfectly on almost any other > device. > > So I setup FreeRadius on my debian pc, and set my cheap AP for Radius > authentication. N900 still can't connect to this. The FreeRadius log shows an > issue with 'bad certificate' whether or not I have the provided certificates > on device. > > Any ideas would help. I suppose someone has at least once got N900 to connect > to such a network via FreeRadius. > _______________________________________________ > maemo-users mailing list > maemo-users@maemo.org > https://lists.maemo.org/mailman/listinfo/maemo-users
There was problem with self signed certificates and certificates which did not have stored CA in maemo certman. I do not remember if this was fixed or not. Try to check if both CA and certificate itself are installed in Settings --> Certificates. I do not have any problem with connecting to wifi WPA2 EAP TTLS+GTC or EAP PEAP+MSCHAPv2. Try to check also syslog, if nokias eapd daemon did not write any error message. Other option is to use wpa_supplicant (which is in extras-devel) and connect manually to wifi network like on any linux machine. I'm using wpa_supplicant for ethernet 802.1X authentification with usb ethernet card connected to n900 in usb host mode and there is no problem. -- Pali Rohár pali.ro...@gmail.com _______________________________________________ maemo-users mailing list maemo-users@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-users
