Le lundi 12 novembre 2012 15:01:19 vous avez écrit : > Op maandag 12 november 2012 14:15:14 schreef Nicolas Lécureuil: > > Le lundi 12 novembre 2012 01:24:55 AL13N a écrit : > > > Ok, so this is a new patch; this time, it's next to the toggle for > > > expert > > > button. > > > > > > I do a new device check, in a separate variable and check with device > > > file > > > as unique; if there's one that isn't in the old list. (or if it's > > > changed > > > size). in that case i put the new entry into the old list. > > > > > > however, it seems that a VM shuts itself off on executing the check when > > > a > > > new USB disk was added. :-( > > > > > > Maybe i'm doing some fundamentals wrong, so i'm asking here if anyone > > > has > > > an insight, idea or direction i should go to instead. > > > > > > i'm thinking because i only do 1 of the 5 preparation checks for new > > > disks, > > > that maybe not everything is done correctly yet: but a halting VM is not > > > exactly what i expected... > > > > > > AL13N > > > > Hi, > > > > just tested but nothing is done/appear when i click on refresh > > well, don't forget that if you test in a VM, the host itself must detect the > new disk too, so i always tested with adding an USB disk. Normally, you > should see an extra tab, if it would work...
no, not in a VM, a real install. > was this in cauldron, or mga2? cauldron > > i guess the good point is that it didn't halt either? you can see it this way
