From: "Andrew D. Clark" <[EMAIL PROTECTED]> > I've had the same problem. ArchRunner seems to have serious performance > problems if you've got heavy list activity and are archiving to both > pipermail and mbox. I "fixed" it by setting ARCHIVE_TO_MBOX=1. This will > only archive to mbox, so your pipermail archives won't be updated. You > should be able to generate pipermail archives by hand later with bin/arch > list_name. It isn't an ideal solution, but at least your message will move > out of the archive queue.
Hmmzz. i am now trying to reboot my machine with 9:33pm up 1 day, 6:38, 7 users, load average: 42.95, 41.97, 40.85 This is very bad! and this is happened after upgrade to b4(+) > > Date: Thu, 31 Oct 2002 15:48:08 +0100 > > From: "Danny Terweij" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Subject: [Mailman-Developers] Much cpu/memory load > > Message-ID: <01ab01c280ec$8739bb20$[EMAIL PROTECTED]> > > Content-Type: text/plain; > > charset="iso-8859-1" > > MIME-Version: 1.0 > > Content-Transfer-Encoding: 7bit > > Precedence: list > > Message: 1 > > > > Hi, > > > > Because my /qfiles/archive/*.* files are not processed by the > > qrunner/ArchRunner my linux box gets overloaded. > > I have now 55mb unproccessed archive files at the qfiles dir. > > The pipermail archives are not updated. > > > > When i do a mailmanctl stop then the Archrunner is still active. I did a > > kill -9 PID and it stops. > > Then i must remove all the lock files found where lockfiles are. > > > > Then the cpu load is back to normal. > > > > 24290 ? S 0:00 /usr/bin/python2 ./mailmanctl start > > 24291 ? D 34:56 qrunner > > /usr/local/mailman/bin/qrunner --runner=ArchRunner:0:1 -s > > 24292 ? S 0:16 qrunner > > /usr/local/mailman/bin/qrunner --runner=BounceRunner:0:1 -s > > 24293 ? S 0:03 qrunner > > /usr/local/mailman/bin/qrunner --runner=CommandRunner:0:1 -s > > 24294 ? S 0:31 qrunner > > /usr/local/mailman/bin/qrunner --runner=IncomingRunner:0:1 -s > > 24295 ? S 0:03 qrunner > > /usr/local/mailman/bin/qrunner --runner=NewsRunner:0:1 -s > > 24296 ? S 0:29 qrunner > > /usr/local/mailman/bin/qrunner --runner=OutgoingRunner:0:1 -s > > 24297 ? S 0:07 qrunner > > /usr/local/mailman/bin/qrunner --runner=VirginRunner:0:1 -s > > > > I think that realy somthing is wrong with the ArchRunner. Looks like it is > > in a loop or is doing nothing. > > The /qfiles/archive/ dir is growing and growing, i must stop mailman very > > often now otherwise de box gets overloaded. > > > > The load was this morning on a average of 10 and all my memory was used > > (20mb left on swap). > > No error and messages at the logs dir :( > > > > Please take a look Barry :) it is the latest cvs. > > You may also take al look on my box if you want and have time... > > > > Danny Terweij > > > > > _______________________________________________ > Mailman-Developers mailing list > [EMAIL PROTECTED] > http://mail.python.org/mailman/listinfo/mailman-developers _______________________________________________ Mailman-Developers mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-developers
