[Mailman-Users] Further on Admin-only posting in 2.1

[Mitchell Marks]

(MM 2.1 on RH 7.2, Sendmail 8.11.6)

Hi,

We have a list, recently moved from 2.0.x to 2.1, which we'd like to keep in "mostly-moderated" mode, with a couple addresses allowed to post without requiring approval, and posting from members help for approval. That's been working pretty well with the method in the FAQ extract quoted below.

However, when a new member is added, her "mod" flag is off. So new members can post without a moderator approval, unless the admins remember to follow up on new member additions by setting that flag. It would be much nicer if the default new member options could be set to have the "mod" flag on. But this doesn't seem to be available from the web admin interface, at least, not among the default options shown on the General page.

I see there is a list setting "new_member_options = 256" for this list. Would the moderation flag be another option I could add into "new_member_options"? Are the bits of "new_member_options" the same as individual member option settings? Could someone please post or steer me to documentation on these option settings?

Thanks,

Mitch Marks


The extract with the method we're following:

>3.11. How do I create a newsletter (admin-post only) ?

>If you want to create a list to which only the admin or a restricted number
>of people can post (such as a newsletter), set member_posting_only to "no"
>and add the addresses of all allowed posters to posters. This is done on the
>Privacy Options page. The relevant items are "Restrict posting to list
>members" and "Addresses of members accepted...". There is a link to more
>detailed information for the items which you might want to read as well.
>[...]

>In 2.1b, "Restrict posting to list members" is no longer available,
>unfortunately. It appears the best solution for 2.1 is to make all members
>require moderation, give them an auto-action if they try to post (discard or
>bounce, e.g.), give all non-subscribers an auto-action, and then either
>specifically allow certain non-subscribed addresses or un-mod certain
>subscribed addresses to allow them to post. (If there is an easier way,
>please correct this.)




--
Mitchell Marks
CUIP Tech Coordinator http://cuip.uchicago.edu
CUIP: Chicago Public Schools / Univ. of Chicago Internet Project
5640 S Ellis Ave AAC-045, Univ of Chgo, Chgo IL 60637

Telephone: Ofc 773-702-6041
Fax 702-8212
Home (v.m. only, ok any time) 241-7166
Email: Primary address: [EMAIL PROTECTED]
Alternate UofC addresses (use especially to report problems with cuip.uchicago.edu): [EMAIL PROTECTED] and [EMAIL PROTECTED]
Off-campus (ISP) address: [EMAIL PROTECTED]

First thing you learn is that you always gotta wait.
--Lou Reed, ca. 1965


--
Mitchell Marks
CUIP Tech Coordinator http://cuip.uchicago.edu
CUIP: Chicago Public Schools / Univ. of Chicago Internet Project
5640 S Ellis Ave AAC-045, Univ of Chgo, Chgo IL 60637

Telephone: Ofc 773-702-6041
Fax 702-8212
Home (v.m. only, ok any time) 241-7166
Email: Primary address: [EMAIL PROTECTED]
Alternate UofC addresses (use especially to report problems with cuip.uchicago.edu): [EMAIL PROTECTED] and [EMAIL PROTECTED]
Off-campus (ISP) address: [EMAIL PROTECTED]

He was just a prawn in their game.



------------------------------------------------------
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/

This message was sent to: archive@jab.org
Unsubscribe or change your options at
http://mail.python.org/mailman/options/mailman-users/archive%40jab.org