May 10th was the day I put in the new hard drive after the old one died. So basically I did a clean install. I had set up the domain/host stuff on the old drive so all I did was reinstall. I only have one domain/host name, and SELinux is on, but not on the snmpd daemon. My firewall is technically on, but since I'm trying to debug, it's set to allow everything. The admin interface never worked since May 10th. It did work on the old drive, but I had the last build of mailman then. There was nothing in /var/log/messages except the usual service starts and stops.
Elissa - ------------------------------ Message: 3 Date: Tue, 17 May 2005 14:46:36 +0900 From: Jim Tittsler <[EMAIL PROTECTED]> Subject: Re: [Mailman-Users] Mailman Bug?/no Admin level web access To: [EMAIL PROTECTED] Cc: Mailman-users list <mailman-users@python.org> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed On May 17, 2005, at 11:25, [EMAIL PROTECTED] wrote: > In response to the > question about checking permissions, yes, I've run it several > times, and > genaliases, check_db and anything else I thought might provide a > clue. All checked > out ok. Are you running with SELinux enabled? (Are there additional clues about the permission failures in /var/log/messages? If you start with SELinux disabled, is Mailman happy?) > My mailman log shows nothing, hasn't been updated since May 10th, > but [...] So, what changed on May 10th? :-) -- Jim Tittsler http://www.OnJapan.net/ GPG: 0x01159DB6 Python Starship http://Starship.Python.net/crew/jwt/ Mailman IRC irc://irc.freenode.net/#mailman ------------------------------ Message: 4 Date: Mon, 16 May 2005 23:41:10 -0700 From: Scot Hacker <[EMAIL PROTECTED]> Subject: Re: [Mailman-Users] Mailman Bug?/no Admin level web access To: mailman-users@python.org Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset=ISO-8859-1; format=flowed > >Elissa wrote: > > > >>I'm hoping someone can help me fix this. I installed mailman, and >>couldn't figure out why the web interface didn't work. It seems I CAN >>access any of the pages, but the admin ones. I get a lovely message in >>the browser: >>"Bug in Mailman version 2.1.6rc3 >> >>We're sorry, we hit a bug! >> >> >> Not sure what your environment is, but I've seen that message in a multi-domain cPanel environment, where you can set up a domain before it's actually living on that host (preparing to move in). You can get as far as creating a list, but when you go to access the admin pages, it fails with that message. As soon as the domain actually resolves to that host, the problem goes away. Scot ------------------------------ ------------------------------------------------------ Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/ Unsubscribe: http://mail.python.org/mailman/options/mailman-users/archive%40jab.org Security Policy: http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq01.027.htp