On 05/24/2014 12:14 PM, Jeff Taylor wrote:
> The entire QRUNNERS section on the machines looks like this:
>
> QRUNNERS = [
> ('ArchRunner', 3,0,3), # messages for the archiver
...
OK. That's as it should be.
> Per your ps command, on this machine I get:
>
> list 11516 11512 0 08:50 ? 00:00:02 /usr/bin/python
> /var/lib/mailman/bin/qrunner --runner=IncomingRunner:0:3 -s
>
> (plus the runners for each of the other sections as well). On machine
> #2 I have 3,1,3 in the cfg and ps shows --runner=IncomingRunner:1:3.
> And on machine #3 I have 3,2,3 in the cfg and ps shows
> --runner=IncomingRunner:2:3.
OK. That's good too.
> I also double-checked that the mailmanctl patch was applied on all three
> machines, and that the Switchboard.py was NOT applied to these three.
> Any other suggestions?
I'm stumped. It should work. Look in Mailman's qrunner logs for these
machines. When a runner exits (unfortunately not when it starts)
mailmanctl reports several things including its slice info. Do you see
any of these and do they look as expected, e.g., 0/3 on the first
machine, 1/3 on the second and 2/3 on the third?.
Also, from what to what did you upgrade?
--
Mark Sapiro <[email protected]> The highway is for gamblers,
San Francisco Bay Area, California better use your sense - B. Dylan
------------------------------------------------------
Mailman-Users mailing list [email protected]
https://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://wiki.list.org/x/AgA3
Security Policy: http://wiki.list.org/x/QIA9
Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/
Unsubscribe:
https://mail.python.org/mailman/options/mailman-users/archive%40jab.org
