baru baca manualnya di pdf.... oooo gitu toh . baru ngerti
btw. mau tanya lagi nih mas. beli output voltage dimana ? ditukang listrik
ada ya?
terus tolong jelasin ini dong.
Plug type: a. Inner hole: 1.3∅
b. Outer: 3.5∅
c. Plug length: 9.6 mm
=======================================================================
How to use an auxiliary power cord or power adapter
The Smart Backup allow you install a 60GB/4200 RPM hard drive without any
auxiliary power, but if
you use a higher capacity drive that requires power current higher than
500ma limit, it may cause
shortage of power from your USB port and make the device running unstable.
In this situation, there are two solutions to get more power supply for your
high-powered hard drive. One
is connecting another twin USB extra power plug to one more free USB port
(see the following photo);
another is using an auxiliary external self-power adapter.
a. Using extra auxiliary power cord
The USB auxiliary power cord is thinner than a regular cable. The picture
showing below is
connecting an extra auxiliary power cord to another USB port for getting
more power.
However, you can't only use this auxiliary USB plug to work your Smart
Backup.
(see gambar 1)
b. Using external AC switching power adapter
The Smart Backup provides a DC jack for external power adapter application.
Using external
power adapter can bring enough power current for your device running
stabilized. You can
refer to the following specification and buying from your local seller.
External switching power adapter specification:
1. Output Voltage/Current: DC 5V/1.5A (see gambar 2)
(Do not use an adapter that over DC 5V, it may damage your device.)
2. Plug type: a. Inner hole: 1.3∅
b. Outer: 3.5∅
c. Plug length: 9.6 mm
(see gambar 3)
On 9/19/06, Nero Sumargono <[EMAIL PROTECTED]> wrote:
>
> Hello LiP,my answer is
>
> as I ever said mas...it was "user knowledge" kan? hehehehe...jd si user ya
> kudu
> aktip ngertiin barang yg mau dibeli...
>
>
[Non-text portions of this message have been removed]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/mailplus/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/mailplus/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
