Hi Maciej,
Am 04.09.2009 um 12:04 schrieb Maciej (Matchek) Blizinski:
...and the prototype part is:
s none /opt/csw/bin/sparcv8/wxrc=/opt/csw/bin/wxrc
f none /opt/csw/bin/sparcv8/wxrc-2.8=/opt/csw/bin/wxrc-2.8 0755
root bin
s none
/opt/csw/bin/wx-config=/opt/csw/lib/wx/config/gtk2-unicode-
release-2.8
l none /opt/csw/bin/wxrc=wxrc-2.8=/opt/csw/bin/isaexec
l none /opt/csw/bin/wxrc-2.8=/opt/csw/bin/isaexec 0755 root bin
It looks like there is a problem when there's a symlink which later
becomes handled by isaexec. Initial "/opt/csw/bin/wxrc=wxrc-2.8"
becomes "/opt/csw/bin/wxrc=wxrc-2.8=/opt/csw/bin/isaexec". Is this a
valid prototype line?
Umh, no, this looks broken. Obiously isaexec should not be applied to
symlinks and I can add that to GAR. That would mean wxrc would
still be a symlink to
wxrc-2.8 which would then be isaexec'ed and relocated to subdirs.
Does this sound
right to you?
Yes, this sounds right.
Ok, fixed in r6176. And isaexec shouldn't have been used in the first
place,
this was broken since r6148 where I made some reorderings to make all
local
builds first (needed for pbuilds) which is fixed now in r6177.
Best regards
-- Dago
_______________________________________________
maintainers mailing list
[email protected]
https://lists.opencsw.org/mailman/listinfo/maintainers
