Re: Fwd: MakeMaker busted with dmake

Abe Timmerman Sat, 05 Apr 2003 06:23:58 -0800

Op een frisse lentedag (Saturday 05 April 2003 16:06), schreef Michael G 
Schwern:


> On Sat, Apr 05, 2003 at 03:59:18PM +0200, Abe Timmerman wrote:
> > It looks like dmake also transforms '}}' into '}' so you'll probably have
> > to do the moral equivalent of:
> >
> >     $text =~ s/{/{{/g if $DMAKE;
> >
> > in MM_Win32::quote_literal() for '}}'
> >
> > I did:
> >
> >     $text =~ s/}}/}}}/ if $DMAKE;
> >
> > it works, but it doesn't feel right...
>
> Could you show me your Makefile and the failing test results before you
> applied this fix?

You already have the failing tests ('dmake disttest' is the one that fails to 
add META.yml to the MANIFEST)

I'll attach the Makefile for ExtUtils::MakeMaker (the problem is in the 
'metafile_addtomanifest' target)

C:\opt\perl590\.cpan\ExtUtils-MakeMaker-snap>dmake -n metafile_addtomanifest
C:\opt\perl590\bin\perl.exe "-Ilib" -MExtUtils::Manifest=maniadd -e 
"maniadd({q{META.yml} => q{Module meta-data in YAML});"

This will give a syntax-error

hth
Good luck,

Abe
-- 
Sam> So does that ring any bells?

Pretty silent around here, I'm afraid.
                                   -- Jarkko Hietaniemi on p5p @ 2002-05-14

# This Makefile is for the ExtUtils::MakeMaker extension to perl.
#
# It was generated automatically by MakeMaker version
# 6.10_01 (Revision: 1.107) from the contents of
# Makefile.PL. Don't edit this file, edit Makefile.PL instead.
#
#       ANY CHANGES MADE HERE WILL BE LOST!
#
#   MakeMaker ARGV: ()
#
#   MakeMaker Parameters:

#     ABSTRACT_FROM => q[lib/ExtUtils/MakeMaker.pm]
#     AUTHOR => q[Michael G Schwern <[EMAIL PROTECTED]>]
#     EXE_FILES => [q[bin/instmodsh]]
#     INSTALLDIRS => q[perl]
#     NAME => q[ExtUtils::MakeMaker]
#     PREREQ_PM => { Pod::Man=>q[0], File::Spec=>q[0.8], File::Basename=>q[0], DirHandle=>q[0] }
#     VERSION_FROM => q[lib/ExtUtils/MakeMaker.pm]

# --- MakeMaker post_initialize section:


# --- MakeMaker const_config section:

# These definitions are from config.sh (via C:/opt/perl590/lib/Config.pm)

# They may have been overridden via Makefile.PL or on the command line
AR = ar
CC = gcc
CCCDLFLAGS =  
CCDLFLAGS =  
DLEXT = dll
DLSRC = dl_win32.xs
LD = g++
LDDLFLAGS = -mdll -g -L"C:\opt\perl590\lib\CORE" -L"C:\MinGW\lib"
LDFLAGS = -g -L"C:\opt\perl590\lib\CORE" -L"C:\MinGW\lib"
LIBC = -lmsvcrt
LIB_EXT = .a
OBJ_EXT = .o
OSNAME = MSWin32
OSVERS = 5.0 Service Pack 3
RANLIB = rem
SITELIBEXP = C:\opt\perl590\site\lib
SITEARCHEXP = C:\opt\perl590\site\lib
SO = dll
EXE_EXT = .exe
FULL_AR = 
VENDORARCHEXP = 
VENDORLIBEXP = 


# --- MakeMaker constants section:
AR_STATIC_ARGS = cr
DIRFILESEP = \\
NAME = ExtUtils::MakeMaker
NAME_SYM = ExtUtils_MakeMaker
VERSION = 6.10_01
VERSION_MACRO = VERSION
VERSION_SYM = 6_10_01
DEFINE_VERSION = -D$(VERSION_MACRO)=\"$(VERSION)\"
XS_VERSION = 6.10_01
XS_VERSION_MACRO = XS_VERSION
XS_DEFINE_VERSION = -D$(XS_VERSION_MACRO)=\"$(XS_VERSION)\"
INST_ARCHLIB = blib\arch
INST_SCRIPT = blib\script
INST_BIN = blib\bin
INST_LIB = blib\lib
INSTALLDIRS = perl
DESTDIR = 
PREFIX = $(DESTDIR)
PERLPREFIX = $(DESTDIR)C:\opt\perl590
SITEPREFIX = $(DESTDIR)C:\opt\perl590\site
VENDORPREFIX = $(DESTDIR)
INSTALLPRIVLIB = $(PERLPREFIX)\lib
INSTALLSITELIB = $(SITEPREFIX)\lib
INSTALLVENDORLIB = 
INSTALLARCHLIB = $(PERLPREFIX)\lib
INSTALLSITEARCH = $(SITEPREFIX)\lib
INSTALLVENDORARCH = 
INSTALLBIN = $(PERLPREFIX)\bin
INSTALLSITEBIN = C:\opt\perl590\bin
INSTALLVENDORBIN = 
INSTALLSCRIPT = $(PERLPREFIX)\bin
PERL_LIB = C:\opt\perl590\lib
PERL_ARCHLIB = C:\opt\perl590\lib
LIBPERL_A = libperl.a
FIRST_MAKEFILE = Makefile
MAKEFILE_OLD = $(FIRST_MAKEFILE).old
MAKE_APERL_FILE = $(FIRST_MAKEFILE).aperl
PERLMAINCC = $(CC)
PERL_INC = C:\opt\perl590\lib\CORE
PERL = C:\opt\perl590\bin\perl.exe
FULLPERL = C:\opt\perl590\bin\perl.exe
ABSPERL = $(PERL)
PERLRUN = $(PERL) "-Ilib"
FULLPERLRUN = $(FULLPERL) "-Ilib"
ABSPERLRUN = $(ABSPERL)
PERLRUNINST = $(PERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
FULLPERLRUNINST = $(FULLPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
ABSPERLRUNINST = $(ABSPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)"
PERL_CORE = 0
PERM_RW = 644
PERM_RWX = 755

MAKEMAKER   = lib/ExtUtils/MakeMaker.pm
MM_VERSION  = 6.10_01
MM_REVISION = 1.107

# FULLEXT = Pathname for extension directory (eg Foo/Bar/Oracle).
# BASEEXT = Basename part of FULLEXT. May be just equal FULLEXT. (eg Oracle)
# PARENT_NAME = NAME without BASEEXT and no trailing :: (eg Foo::Bar)
# DLBASE  = Basename part of dynamic library. May be just equal BASEEXT.
FULLEXT = ExtUtils\MakeMaker
BASEEXT = MakeMaker
PARENT_NAME = ExtUtils
DLBASE = $(BASEEXT)
VERSION_FROM = lib/ExtUtils/MakeMaker.pm
OBJECT = 
LDFROM = $(OBJECT)
LINKTYPE = dynamic

# Handy lists of source code files:
XS_FILES = 
C_FILES  = 
O_FILES  = 
H_FILES  = 
MAN1PODS = 
MAN3PODS = lib/ExtUtils/Command.pm \
	lib/ExtUtils/Command/MM.pm \
	lib/ExtUtils/Install.pm \
	lib/ExtUtils/Installed.pm \
	lib/ExtUtils/Liblist.pm \
	lib/ExtUtils/MM.pm \
	lib/ExtUtils/MM_Any.pm \
	lib/ExtUtils/MM_BeOS.pm \
	lib/ExtUtils/MM_Cygwin.pm \
	lib/ExtUtils/MM_DOS.pm \
	lib/ExtUtils/MM_MacOS.pm \
	lib/ExtUtils/MM_NW5.pm \
	lib/ExtUtils/MM_OS2.pm \
	lib/ExtUtils/MM_UWIN.pm \
	lib/ExtUtils/MM_Unix.pm \
	lib/ExtUtils/MM_VMS.pm \
	lib/ExtUtils/MM_Win32.pm \
	lib/ExtUtils/MM_Win95.pm \
	lib/ExtUtils/MY.pm \
	lib/ExtUtils/MakeMaker.pm \
	lib/ExtUtils/MakeMaker/FAQ.pod \
	lib/ExtUtils/MakeMaker/Tutorial.pod \
	lib/ExtUtils/MakeMaker/vmsish.pm \
	lib/ExtUtils/Manifest.pm \
	lib/ExtUtils/Mkbootstrap.pm \
	lib/ExtUtils/Mksymlists.pm \
	lib/ExtUtils/Packlist.pm \
	lib/ExtUtils/testlib.pm
INST_MAN1DIR = blib\man1
MAN1EXT = 1
INSTALLMAN1DIR = $(PERLPREFIX)\man\man1
INSTALLSITEMAN1DIR = $(SITEPREFIX)\man\man1
INSTALLVENDORMAN1DIR = 
INST_MAN3DIR = blib\man3
MAN3EXT = 3
INSTALLMAN3DIR = $(PERLPREFIX)\man\man3
INSTALLSITEMAN3DIR = $(SITEPREFIX)\man\man3
INSTALLVENDORMAN3DIR = 

# Where is the Config information that we are using/depend on
CONFIGDEP = $(PERL_ARCHLIB)$(DIRFILESEP)Config.pm $(PERL_INC)$(DIRFILESEP)config.h

# Where to build things
INST_LIBDIR      = blib\lib\ExtUtils
INST_ARCHLIBDIR  = blib\arch\ExtUtils

INST_AUTODIR     = blib\lib\auto\ExtUtils\MakeMaker
INST_ARCHAUTODIR = blib\arch\auto\ExtUtils\MakeMaker

INST_STATIC      = 
INST_DYNAMIC     = 
INST_BOOT        = 

# Extra linker info
EXPORT_LIST        = $(BASEEXT).def
PERL_ARCHIVE       = $(PERL_INC)\libperl59.a
PERL_ARCHIVE_AFTER = 


TO_INST_PM = lib/ExtUtils/Command.pm \
	lib/ExtUtils/Command/MM.pm \
	lib/ExtUtils/Install.pm \
	lib/ExtUtils/Installed.pm \
	lib/ExtUtils/Liblist.pm \
	lib/ExtUtils/Liblist/Kid.pm \
	lib/ExtUtils/MANIFEST.SKIP \
	lib/ExtUtils/MM.pm \
	lib/ExtUtils/MM_Any.pm \
	lib/ExtUtils/MM_BeOS.pm \
	lib/ExtUtils/MM_Cygwin.pm \
	lib/ExtUtils/MM_DOS.pm \
	lib/ExtUtils/MM_MacOS.pm \
	lib/ExtUtils/MM_NW5.pm \
	lib/ExtUtils/MM_OS2.pm \
	lib/ExtUtils/MM_UWIN.pm \
	lib/ExtUtils/MM_Unix.pm \
	lib/ExtUtils/MM_VMS.pm \
	lib/ExtUtils/MM_Win32.pm \
	lib/ExtUtils/MM_Win95.pm \
	lib/ExtUtils/MY.pm \
	lib/ExtUtils/MakeMaker.pm \
	lib/ExtUtils/MakeMaker/FAQ.pod \
	lib/ExtUtils/MakeMaker/Tutorial.pod \
	lib/ExtUtils/MakeMaker/vmsish.pm \
	lib/ExtUtils/Manifest.pm \
	lib/ExtUtils/Mkbootstrap.pm \
	lib/ExtUtils/Mksymlists.pm \
	lib/ExtUtils/Packlist.pm \
	lib/ExtUtils/testlib.pm

PM_TO_BLIB = lib/ExtUtils/Installed.pm \
	blib\lib\ExtUtils\Installed.pm \
	lib/ExtUtils/MM_OS2.pm \
	blib\lib\ExtUtils\MM_OS2.pm \
	lib/ExtUtils/MakeMaker.pm \
	blib\lib\ExtUtils\MakeMaker.pm \
	lib/ExtUtils/Install.pm \
	blib\lib\ExtUtils\Install.pm \
	lib/ExtUtils/Manifest.pm \
	blib\lib\ExtUtils\Manifest.pm \
	lib/ExtUtils/Command.pm \
	blib\lib\ExtUtils\Command.pm \
	lib/ExtUtils/MM_Unix.pm \
	blib\lib\ExtUtils\MM_Unix.pm \
	lib/ExtUtils/Mksymlists.pm \
	blib\lib\ExtUtils\Mksymlists.pm \
	lib/ExtUtils/MM.pm \
	blib\lib\ExtUtils\MM.pm \
	lib/ExtUtils/MANIFEST.SKIP \
	blib\lib\ExtUtils\MANIFEST.SKIP \
	lib/ExtUtils/MM_Win32.pm \
	blib\lib\ExtUtils\MM_Win32.pm \
	lib/ExtUtils/MM_UWIN.pm \
	blib\lib\ExtUtils\MM_UWIN.pm \
	lib/ExtUtils/testlib.pm \
	blib\lib\ExtUtils\testlib.pm \
	lib/ExtUtils/MakeMaker/vmsish.pm \
	blib\lib\ExtUtils\MakeMaker\vmsish.pm \
	lib/ExtUtils/MY.pm \
	blib\lib\ExtUtils\MY.pm \
	lib/ExtUtils/MM_DOS.pm \
	blib\lib\ExtUtils\MM_DOS.pm \
	lib/ExtUtils/MM_Cygwin.pm \
	blib\lib\ExtUtils\MM_Cygwin.pm \
	lib/ExtUtils/MM_MacOS.pm \
	blib\lib\ExtUtils\MM_MacOS.pm \
	lib/ExtUtils/MM_Win95.pm \
	blib\lib\ExtUtils\MM_Win95.pm \
	lib/ExtUtils/MM_VMS.pm \
	blib\lib\ExtUtils\MM_VMS.pm \
	lib/ExtUtils/MM_BeOS.pm \
	blib\lib\ExtUtils\MM_BeOS.pm \
	lib/ExtUtils/Liblist.pm \
	blib\lib\ExtUtils\Liblist.pm \
	lib/ExtUtils/MakeMaker/Tutorial.pod \
	blib\lib\ExtUtils\MakeMaker\Tutorial.pod \
	lib/ExtUtils/Packlist.pm \
	blib\lib\ExtUtils\Packlist.pm \
	lib/ExtUtils/Liblist/Kid.pm \
	blib\lib\ExtUtils\Liblist\Kid.pm \
	lib/ExtUtils/Mkbootstrap.pm \
	blib\lib\ExtUtils\Mkbootstrap.pm \
	lib/ExtUtils/MakeMaker/FAQ.pod \
	blib\lib\ExtUtils\MakeMaker\FAQ.pod \
	lib/ExtUtils/Command/MM.pm \
	blib\lib\ExtUtils\Command\MM.pm \
	lib/ExtUtils/MM_NW5.pm \
	blib\lib\ExtUtils\MM_NW5.pm \
	lib/ExtUtils/MM_Any.pm \
	blib\lib\ExtUtils\MM_Any.pm


# --- MakeMaker platform_constants section:
MM_Win32_VERSION = 1.06


# --- MakeMaker tool_autosplit section:
# Usage: $(AUTOSPLITFILE) FileToSplit AutoDirToSplitInto
AUTOSPLITFILE = $(PERLRUN)  -e "use AutoSplit;  autosplit($$ARGV[0], $$ARGV[1], 0, 1, 1)"



# --- MakeMaker tool_xsubpp section:


# --- MakeMaker tools_other section:
CHMOD = $(PERLRUN) -MExtUtils::Command -e chmod
CP = $(PERLRUN) -MExtUtils::Command -e cp
MV = $(PERLRUN) -MExtUtils::Command -e mv
NOOP = rem
NOECHO = @
RM_F = $(PERLRUN) -MExtUtils::Command -e rm_f
RM_RF = $(PERLRUN) -MExtUtils::Command -e rm_rf
TEST_F = $(PERLRUN) -MExtUtils::Command -e test_f
TOUCH = $(PERLRUN) -MExtUtils::Command -e touch
UMASK_NULL = umask 0
DEV_NULL = > NUL
MKPATH = $(PERLRUN) "-MExtUtils::Command" -e mkpath
EQUALIZE_TIMESTAMP = $(PERLRUN) "-MExtUtils::Command" -e eqtime
ECHO = $(PERLRUN) -l -e "print [EMAIL PROTECTED]"
UNINST = 0
VERBINST = 0
MOD_INSTALL = $(PERLRUN) -MExtUtils::Install -e "install([EMAIL PROTECTED], '$(VERBINST)', 0, '$(UNINST)');"
DOC_INSTALL = $(PERLRUN) "-MExtUtils::Command::MM" -e perllocal_install
UNINSTALL = $(PERLRUN) "-MExtUtils::Command::MM" -e uninstall
WARN_IF_OLD_PACKLIST = $(PERLRUN) "-MExtUtils::Command::MM" -e warn_if_old_packlist


# --- MakeMaker makemakerdflt section:
makemakerdflt: all
	$(NOECHO) $(NOOP)


# --- MakeMaker dist section:
TAR = tar
TARFLAGS = cvf
ZIP = zip
ZIPFLAGS = -r
COMPRESS = gzip --best
SUFFIX = .gz
SHAR = shar
PREOP = $(NOECHO) $(NOOP)
POSTOP = $(NOECHO) $(NOOP)
TO_UNIX = $(NOECHO) $(NOOP)
CI = ci -u
RCS_LABEL = rcs -Nv$(VERSION_SYM): -q
DIST_CP = best
DIST_DEFAULT = tardist
DISTNAME = ExtUtils-MakeMaker
DISTVNAME = ExtUtils-MakeMaker-6.10_01


# --- MakeMaker macro section:


# --- MakeMaker depend section:


# --- MakeMaker cflags section:


# --- MakeMaker const_loadlibs section:


# --- MakeMaker const_cccmd section:


# --- MakeMaker post_constants section:


# --- MakeMaker pasthru section:
PASTHRU = 

# --- MakeMaker special_targets section:
.SUFFIXES: .xs .c .C .cpp .i .s .cxx .cc $(OBJ_EXT)

.PHONY: all config static dynamic test linkext manifest

.USESHELL :


# --- MakeMaker c_o section:


# --- MakeMaker xs_c section:


# --- MakeMaker xs_o section:


# --- MakeMaker top_targets section:
all :: pure_all
	$(NOECHO) $(NOOP)


pure_all :: config pm_to_blib subdirs linkext
	$(NOECHO) $(NOOP)

subdirs :: $(MYEXTLIB)
	$(NOECHO) $(NOOP)

config :: $(FIRST_MAKEFILE) $(INST_LIBDIR)$(DIRFILESEP).exists
	$(NOECHO) $(NOOP)

config :: $(INST_ARCHAUTODIR)$(DIRFILESEP).exists
	$(NOECHO) $(NOOP)

config :: $(INST_AUTODIR)$(DIRFILESEP).exists
	$(NOECHO) $(NOOP)

$(INST_AUTODIR)\.exists :: C:\opt\perl590\lib\CORE\perl.h
	$(NOECHO) $(MKPATH) $(INST_AUTODIR)
	$(NOECHO) $(EQUALIZE_TIMESTAMP) C:\opt\perl590\lib\CORE\perl.h $(INST_AUTODIR)\.exists

	-$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_AUTODIR)

$(INST_LIBDIR)\.exists :: C:\opt\perl590\lib\CORE\perl.h
	$(NOECHO) $(MKPATH) $(INST_LIBDIR)
	$(NOECHO) $(EQUALIZE_TIMESTAMP) C:\opt\perl590\lib\CORE\perl.h $(INST_LIBDIR)\.exists

	-$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_LIBDIR)

$(INST_ARCHAUTODIR)\.exists :: C:\opt\perl590\lib\CORE\perl.h
	$(NOECHO) $(MKPATH) $(INST_ARCHAUTODIR)
	$(NOECHO) $(EQUALIZE_TIMESTAMP) C:\opt\perl590\lib\CORE\perl.h $(INST_ARCHAUTODIR)\.exists

	-$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_ARCHAUTODIR)

config :: $(INST_MAN3DIR)$(DIRFILESEP).exists
	$(NOECHO) $(NOOP)


$(INST_MAN3DIR)\.exists :: C:\opt\perl590\lib\CORE\perl.h
	$(NOECHO) $(MKPATH) $(INST_MAN3DIR)
	$(NOECHO) $(EQUALIZE_TIMESTAMP) C:\opt\perl590\lib\CORE\perl.h $(INST_MAN3DIR)\.exists

	-$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_MAN3DIR)

help:
	perldoc ExtUtils::MakeMaker


# --- MakeMaker linkext section:

linkext :: $(LINKTYPE)
	$(NOECHO) $(NOOP)


# --- MakeMaker dlsyms section:

MakeMaker.def: Makefile.PL
	$(PERLRUN) -MExtUtils::Mksymlists \
     -e "Mksymlists('NAME'=>\"ExtUtils::MakeMaker\", 'DLBASE' => '$(BASEEXT)', 'DL_FUNCS' => {  }, 'FUNCLIST' => [], 'IMPORTS' => {  }, 'DL_VARS' => []);"


# --- MakeMaker dynamic section:

## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make dynamic"
dynamic :: $(FIRST_MAKEFILE) $(INST_DYNAMIC) $(INST_BOOT)
	$(NOECHO) $(NOOP)


# --- MakeMaker dynamic_bs section:

BOOTSTRAP =


# --- MakeMaker dynamic_lib section:


# --- MakeMaker static section:

## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make static"
static :: $(FIRST_MAKEFILE) $(INST_STATIC)
	$(NOECHO) $(NOOP)


# --- MakeMaker static_lib section:


# --- MakeMaker manifypods section:

# --- Begin manifypods section:
POD2MAN_EXE = $(PERLRUN) "-MExtUtils::Command::MM" -e pod2man "--"


manifypods : pure_all  \
	lib/ExtUtils/Installed.pm \
	lib/ExtUtils/MM_OS2.pm \
	lib/ExtUtils/MakeMaker.pm \
	lib/ExtUtils/Install.pm \
	lib/ExtUtils/Manifest.pm \
	lib/ExtUtils/Command.pm \
	lib/ExtUtils/MM_Unix.pm \
	lib/ExtUtils/Mksymlists.pm \
	lib/ExtUtils/MM.pm \
	lib/ExtUtils/MM_Win32.pm \
	lib/ExtUtils/MM_UWIN.pm \
	lib/ExtUtils/testlib.pm \
	lib/ExtUtils/MakeMaker/vmsish.pm \
	lib/ExtUtils/MY.pm \
	lib/ExtUtils/MM_DOS.pm \
	lib/ExtUtils/MM_Cygwin.pm \
	lib/ExtUtils/MM_MacOS.pm \
	lib/ExtUtils/MM_Win95.pm \
	lib/ExtUtils/MM_VMS.pm \
	lib/ExtUtils/MM_BeOS.pm \
	lib/ExtUtils/Liblist.pm \
	lib/ExtUtils/MakeMaker/Tutorial.pod \
	lib/ExtUtils/Packlist.pm \
	lib/ExtUtils/Mkbootstrap.pm \
	lib/ExtUtils/MakeMaker/FAQ.pod \
	lib/ExtUtils/Command/MM.pm \
	lib/ExtUtils/MM_NW5.pm \
	lib/ExtUtils/MM_Any.pm \
	lib/ExtUtils/Installed.pm \
	lib/ExtUtils/MM_OS2.pm \
	lib/ExtUtils/MakeMaker.pm \
	lib/ExtUtils/Install.pm \
	lib/ExtUtils/Manifest.pm \
	lib/ExtUtils/Command.pm \
	lib/ExtUtils/MM_Unix.pm \
	lib/ExtUtils/Mksymlists.pm \
	lib/ExtUtils/MM.pm \
	lib/ExtUtils/MM_Win32.pm \
	lib/ExtUtils/MM_UWIN.pm \
	lib/ExtUtils/testlib.pm \
	lib/ExtUtils/MakeMaker/vmsish.pm \
	lib/ExtUtils/MY.pm \
	lib/ExtUtils/MM_DOS.pm \
	lib/ExtUtils/MM_Cygwin.pm \
	lib/ExtUtils/MM_MacOS.pm \
	lib/ExtUtils/MM_Win95.pm \
	lib/ExtUtils/MM_VMS.pm \
	lib/ExtUtils/MM_BeOS.pm \
	lib/ExtUtils/Liblist.pm \
	lib/ExtUtils/MakeMaker/Tutorial.pod \
	lib/ExtUtils/Packlist.pm \
	lib/ExtUtils/Mkbootstrap.pm \
	lib/ExtUtils/MakeMaker/FAQ.pod \
	lib/ExtUtils/Command/MM.pm \
	lib/ExtUtils/MM_NW5.pm \
	lib/ExtUtils/MM_Any.pm
	$(NOECHO) $(POD2MAN_EXE) --section=3 --perm_rw=$(PERM_RW)\
	  lib/ExtUtils/Installed.pm $(INST_MAN3DIR)\ExtUtils.Installed.$(MAN3EXT) \
	  lib/ExtUtils/MM_OS2.pm $(INST_MAN3DIR)\ExtUtils.MM_OS2.$(MAN3EXT) \
	  lib/ExtUtils/MakeMaker.pm $(INST_MAN3DIR)\ExtUtils.MakeMaker.$(MAN3EXT) \
	  lib/ExtUtils/Install.pm $(INST_MAN3DIR)\ExtUtils.Install.$(MAN3EXT) \
	  lib/ExtUtils/Manifest.pm $(INST_MAN3DIR)\ExtUtils.Manifest.$(MAN3EXT) \
	  lib/ExtUtils/Command.pm $(INST_MAN3DIR)\ExtUtils.Command.$(MAN3EXT) \
	  lib/ExtUtils/MM_Unix.pm $(INST_MAN3DIR)\ExtUtils.MM_Unix.$(MAN3EXT) \
	  lib/ExtUtils/Mksymlists.pm $(INST_MAN3DIR)\ExtUtils.Mksymlists.$(MAN3EXT) \
	  lib/ExtUtils/MM.pm $(INST_MAN3DIR)\ExtUtils.MM.$(MAN3EXT) \
	  lib/ExtUtils/MM_Win32.pm $(INST_MAN3DIR)\ExtUtils.MM_Win32.$(MAN3EXT) \
	  lib/ExtUtils/MM_UWIN.pm $(INST_MAN3DIR)\ExtUtils.MM_UWIN.$(MAN3EXT) \
	  lib/ExtUtils/testlib.pm $(INST_MAN3DIR)\ExtUtils.testlib.$(MAN3EXT) \
	  lib/ExtUtils/MakeMaker/vmsish.pm $(INST_MAN3DIR)\ExtUtils.MakeMaker.vmsish.$(MAN3EXT) \
	  lib/ExtUtils/MY.pm $(INST_MAN3DIR)\ExtUtils.MY.$(MAN3EXT) \
	  lib/ExtUtils/MM_DOS.pm $(INST_MAN3DIR)\ExtUtils.MM_DOS.$(MAN3EXT) \
	  lib/ExtUtils/MM_Cygwin.pm $(INST_MAN3DIR)\ExtUtils.MM_Cygwin.$(MAN3EXT) \
	  lib/ExtUtils/MM_MacOS.pm $(INST_MAN3DIR)\ExtUtils.MM_MacOS.$(MAN3EXT) \
	  lib/ExtUtils/MM_Win95.pm $(INST_MAN3DIR)\ExtUtils.MM_Win95.$(MAN3EXT) \
	  lib/ExtUtils/MM_VMS.pm $(INST_MAN3DIR)\ExtUtils.MM_VMS.$(MAN3EXT) \
	  lib/ExtUtils/MM_BeOS.pm $(INST_MAN3DIR)\ExtUtils.MM_BeOS.$(MAN3EXT) \
	  lib/ExtUtils/Liblist.pm $(INST_MAN3DIR)\ExtUtils.Liblist.$(MAN3EXT) \
	  lib/ExtUtils/MakeMaker/Tutorial.pod $(INST_MAN3DIR)\ExtUtils.MakeMaker.Tutorial.$(MAN3EXT) \
	  lib/ExtUtils/Packlist.pm $(INST_MAN3DIR)\ExtUtils.Packlist.$(MAN3EXT) \
	  lib/ExtUtils/Mkbootstrap.pm $(INST_MAN3DIR)\ExtUtils.Mkbootstrap.$(MAN3EXT) \
	  lib/ExtUtils/MakeMaker/FAQ.pod $(INST_MAN3DIR)\ExtUtils.MakeMaker.FAQ.$(MAN3EXT) \
	  lib/ExtUtils/Command/MM.pm $(INST_MAN3DIR)\ExtUtils.Command.MM.$(MAN3EXT) \
	  lib/ExtUtils/MM_NW5.pm $(INST_MAN3DIR)\ExtUtils.MM_NW5.$(MAN3EXT) \
	  lib/ExtUtils/MM_Any.pm $(INST_MAN3DIR)\ExtUtils.MM_Any.$(MAN3EXT) 


# --- End manifypods section --- #



# --- MakeMaker processPL section:


# --- MakeMaker installbin section:

$(INST_SCRIPT)\.exists :: C:\opt\perl590\lib\CORE\perl.h
	$(NOECHO) $(MKPATH) $(INST_SCRIPT)
	$(NOECHO) $(EQUALIZE_TIMESTAMP) C:\opt\perl590\lib\CORE\perl.h $(INST_SCRIPT)\.exists

	-$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_SCRIPT)

EXE_FILES = bin/instmodsh

FIXIN = pl2bat.bat

pure_all :: $(INST_SCRIPT)\instmodsh
	$(NOECHO) $(NOOP)

realclean ::
	$(RM_F) $(INST_SCRIPT)\instmodsh

$(INST_SCRIPT)\instmodsh: bin/instmodsh $(FIRST_MAKEFILE) $(INST_SCRIPT)\.exists
	$(NOECHO) $(RM_F) $(INST_SCRIPT)\instmodsh
	$(CP) bin/instmodsh $(INST_SCRIPT)\instmodsh
	$(FIXIN) $(INST_SCRIPT)\instmodsh
	-$(NOECHO) $(CHMOD) $(PERM_RWX) $(INST_SCRIPT)\instmodsh


# --- MakeMaker subdirs section:

# none

# --- MakeMaker clean_subdirs section:
clean_subdirs :
	$(NOECHO) $(NOOP)


# --- MakeMaker clean section:

# Delete temporary files but do not touch installed files. We don't delete
# the Makefile here so a later make realclean still has a makefile to use.

clean :: clean_subdirs
	-$(RM_RF) ./blib $(MAKE_APERL_FILE) $(INST_ARCHAUTODIR)/extralibs.all perlmain.c tmon.out mon.out so_locations pm_to_blib *$(OBJ_EXT) *$(LIB_EXT) perl.exe perl perl$(EXE_EXT) $(BOOTSTRAP) $(BASEEXT).bso $(BASEEXT).def lib$(BASEEXT).def $(BASEEXT).exp $(BASEEXT).x core core.*perl.*.? *perl.core
	-$(MV) $(FIRST_MAKEFILE) $(MAKEFILE_OLD) $(DEV_NULL)
clean ::
	-$(RM_F) dll.base dll.exp



# --- MakeMaker realclean_subdirs section:
realclean_subdirs :
	$(NOECHO) $(NOOP)


# --- MakeMaker realclean section:

# Delete temporary files (via clean) and also delete installed files
realclean purge ::  clean realclean_subdirs
	$(RM_RF) $(INST_AUTODIR) $(INST_ARCHAUTODIR)
	$(RM_RF) $(DISTVNAME)
	$(RM_F)  $(MAKEFILE_OLD) $(FIRST_MAKEFILE)


# --- MakeMaker metafile section:
metafile :
	$(NOECHO) $(ECHO) "#XXXXXXX This is a prototype!!!  It will change in the future!!! XXXXX#" > META.yml
	$(NOECHO) $(ECHO) "name:         ExtUtils-MakeMaker" >> META.yml
	$(NOECHO) $(ECHO) "version:      6.10_01" >> META.yml
	$(NOECHO) $(ECHO) "version_from: lib/ExtUtils/MakeMaker.pm" >> META.yml
	$(NOECHO) $(ECHO) "installdirs:  perl" >> META.yml
	$(NOECHO) $(ECHO) "requires:" >> META.yml
	$(NOECHO) $(ECHO) "    Pod::Man:                      0" >> META.yml
	$(NOECHO) $(ECHO) "    File::Spec:                    0.8" >> META.yml
	$(NOECHO) $(ECHO) "    File::Basename:                0" >> META.yml
	$(NOECHO) $(ECHO) "    DirHandle:                     0" >> META.yml
	$(NOECHO) $(ECHO) "" >> META.yml
	$(NOECHO) $(ECHO) "distribution_type: module" >> META.yml
	$(NOECHO) $(ECHO) "generated_by: ExtUtils::MakeMaker version 6.10_01" >> META.yml


# --- MakeMaker metafile_addtomanifest section:
metafile_addtomanifest:
	$(NOECHO) $(PERLRUN) -MExtUtils::Manifest=maniadd -e "maniadd({{q{{META.yml} => q{{Module meta-data in YAML}});"


# --- MakeMaker dist_basics section:
distclean :: realclean distcheck
	$(NOECHO) $(NOOP)

distcheck :
	$(PERLRUN) "-MExtUtils::Manifest=fullcheck" -e fullcheck

skipcheck :
	$(PERLRUN) "-MExtUtils::Manifest=skipcheck" -e skipcheck

manifest :
	$(PERLRUN) "-MExtUtils::Manifest=mkmanifest" -e mkmanifest

veryclean : realclean
	$(RM_F) *~ *.orig */*~ */*.orig



# --- MakeMaker dist_core section:

dist : $(DIST_DEFAULT)
	$(NOECHO) $(PERLRUN) -l -e "print 'Warning: Makefile possibly out of date with $(VERSION_FROM)'\
  if -e '$(VERSION_FROM)' and -M '$(VERSION_FROM)' < -M '$(FIRST_MAKEFILE)';"

tardist : $(DISTVNAME).tar$(SUFFIX)
	$(NOECHO) $(NOOP)

uutardist : $(DISTVNAME).tar$(SUFFIX)
	uuencode $(DISTVNAME).tar$(SUFFIX) $(DISTVNAME).tar$(SUFFIX) > $(DISTVNAME).tar$(SUFFIX)_uu

$(DISTVNAME).tar$(SUFFIX) : distdir
	$(PREOP)
	$(TO_UNIX)
	$(TAR) $(TARFLAGS) $(DISTVNAME).tar $(DISTVNAME)
	$(RM_RF) $(DISTVNAME)
	$(COMPRESS) $(DISTVNAME).tar
	$(POSTOP)

zipdist : $(DISTVNAME).zip
	$(NOECHO) $(NOOP)

$(DISTVNAME).zip : distdir
	$(PREOP)
	$(ZIP) $(ZIPFLAGS) $(DISTVNAME).zip $(DISTVNAME)
	$(RM_RF) $(DISTVNAME)
	$(POSTOP)

shdist : distdir
	$(PREOP)
	$(SHAR) $(DISTVNAME) > $(DISTVNAME).shar
	$(RM_RF) $(DISTVNAME)
	$(POSTOP)


# --- MakeMaker distdir section:
distdir : metafile metafile_addtomanifest
	$(RM_RF) $(DISTVNAME)
	$(PERLRUN) "-MExtUtils::Manifest=manicopy,maniread" \
		-e "manicopy(maniread(),'$(DISTVNAME)', '$(DIST_CP)');"



# --- MakeMaker dist_test section:

disttest : distdir
	cd $(DISTVNAME) && $(ABSPERLRUN) Makefile.PL
	cd $(DISTVNAME) && $(MAKE) $(PASTHRU)
	cd $(DISTVNAME) && $(MAKE) test $(PASTHRU)


# --- MakeMaker dist_ci section:

ci :
	$(PERLRUN) "-MExtUtils::Manifest=maniread" \
	  -e "@all = keys %{ maniread() };" \
	  -e "print("Executing $(CI) @all\n"); system(qq{$(CI) @all});" \
	  -e "print("Executing $(RCS_LABEL) ...\n"); system(qq{$(RCS_LABEL) @all});"


# --- MakeMaker install section:

install :: all pure_install doc_install

install_perl :: all pure_perl_install doc_perl_install

install_site :: all pure_site_install doc_site_install

install_vendor :: all pure_vendor_install doc_vendor_install

pure_install :: pure_$(INSTALLDIRS)_install

doc_install :: doc_$(INSTALLDIRS)_install

pure__install : pure_site_install
	$(NOECHO) $(ECHO) INSTALLDIRS not defined, defaulting to INSTALLDIRS=site

doc__install : doc_site_install
	$(NOECHO) $(ECHO) INSTALLDIRS not defined, defaulting to INSTALLDIRS=site

pure_perl_install ::
	$(NOECHO) $(MOD_INSTALL) \
		read $(PERL_ARCHLIB)\auto\$(FULLEXT)\.packlist \
		write $(INSTALLARCHLIB)\auto\$(FULLEXT)\.packlist \
		$(INST_LIB) $(INSTALLPRIVLIB) \
		$(INST_ARCHLIB) $(INSTALLARCHLIB) \
		$(INST_BIN) $(INSTALLBIN) \
		$(INST_SCRIPT) $(INSTALLSCRIPT) \
		$(INST_MAN1DIR) $(INSTALLMAN1DIR) \
		$(INST_MAN3DIR) $(INSTALLMAN3DIR)
	$(NOECHO) $(WARN_IF_OLD_PACKLIST) \
		$(SITEARCHEXP)\auto\$(FULLEXT)


pure_site_install ::
	$(NOECHO) $(MOD_INSTALL) \
		read $(SITEARCHEXP)\auto\$(FULLEXT)\.packlist \
		write $(INSTALLSITEARCH)\auto\$(FULLEXT)\.packlist \
		$(INST_LIB) $(INSTALLSITELIB) \
		$(INST_ARCHLIB) $(INSTALLSITEARCH) \
		$(INST_BIN) $(INSTALLSITEBIN) \
		$(INST_SCRIPT) $(INSTALLSCRIPT) \
		$(INST_MAN1DIR) $(INSTALLSITEMAN1DIR) \
		$(INST_MAN3DIR) $(INSTALLSITEMAN3DIR)
	$(NOECHO) $(WARN_IF_OLD_PACKLIST) \
		$(PERL_ARCHLIB)\auto\$(FULLEXT)

pure_vendor_install ::
	$(NOECHO) $(MOD_INSTALL) \
		read $(VENDORARCHEXP)\auto\$(FULLEXT)\.packlist \
		write $(INSTALLVENDORARCH)\auto\$(FULLEXT)\.packlist \
		$(INST_LIB) $(INSTALLVENDORLIB) \
		$(INST_ARCHLIB) $(INSTALLVENDORARCH) \
		$(INST_BIN) $(INSTALLVENDORBIN) \
		$(INST_SCRIPT) $(INSTALLSCRIPT) \
		$(INST_MAN1DIR) $(INSTALLVENDORMAN1DIR) \
		$(INST_MAN3DIR) $(INSTALLVENDORMAN3DIR)

doc_perl_install ::
	$(NOECHO) $(ECHO) Appending installation info to $(INSTALLARCHLIB)/perllocal.pod
	-$(NOECHO) $(MKPATH) $(INSTALLARCHLIB)
	-$(NOECHO) $(DOC_INSTALL) \
		"Module" "$(NAME)" \
		"installed into" "$(INSTALLPRIVLIB)" \
		LINKTYPE "$(LINKTYPE)" \
		VERSION "$(VERSION)" \
		EXE_FILES "$(EXE_FILES)" \
		>> $(INSTALLARCHLIB)\perllocal.pod

doc_site_install ::
	$(NOECHO) $(ECHO) Appending installation info to $(INSTALLSITEARCH)/perllocal.pod
	-$(NOECHO) $(MKPATH) $(INSTALLSITEARCH)
	-$(NOECHO) $(DOC_INSTALL) \
		"Module" "$(NAME)" \
		"installed into" "$(INSTALLSITELIB)" \
		LINKTYPE "$(LINKTYPE)" \
		VERSION "$(VERSION)" \
		EXE_FILES "$(EXE_FILES)" \
		>> $(INSTALLSITEARCH)\perllocal.pod

doc_vendor_install ::
	$(NOECHO) $(ECHO) Appending installation info to $(INSTALLVENDORARCH)/perllocal.pod
	-$(NOECHO) $(MKPATH) $(INSTALLVENDORARCH)
	-$(NOECHO) $(DOC_INSTALL) \
		"Module" "$(NAME)" \
		"installed into" "$(INSTALLVENDORLIB)" \
		LINKTYPE "$(LINKTYPE)" \
		VERSION "$(VERSION)" \
		EXE_FILES "$(EXE_FILES)" \
		>> $(INSTALLVENDORARCH)\perllocal.pod


uninstall :: uninstall_from_$(INSTALLDIRS)dirs

uninstall_from_perldirs ::
	$(NOECHO) $(UNINSTALL) $(PERL_ARCHLIB)\auto\$(FULLEXT)\.packlist

uninstall_from_sitedirs ::
	$(NOECHO) $(UNINSTALL) $(SITEARCHEXP)\auto\$(FULLEXT)\.packlist

uninstall_from_vendordirs ::
	$(NOECHO) $(UNINSTALL) $(VENDORARCHEXP)\auto\$(FULLEXT)\.packlist


# --- MakeMaker force section:
# Phony target to force checking subdirectories.
FORCE:
	$(NOECHO) $(NOOP)


# --- MakeMaker perldepend section:


# --- MakeMaker makefile section:

# We take a very conservative approach here, but it\'s worth it.
# We move Makefile to Makefile.old here to avoid gnu make looping.
$(FIRST_MAKEFILE) : Makefile.PL $(CONFIGDEP)
	$(NOECHO) $(ECHO) "Makefile out-of-date with respect to $?"
	$(NOECHO) $(ECHO) "Cleaning current config before rebuilding Makefile..."
	$(NOECHO) $(RM_F) $(MAKEFILE_OLD)
	$(NOECHO) $(MV)   $(FIRST_MAKEFILE) $(MAKEFILE_OLD)
	-$(MAKE) -f $(MAKEFILE_OLD) clean $(DEV_NULL) || $(NOOP)
	$(PERLRUN) Makefile.PL 
	$(NOECHO) $(ECHO) "==> Your Makefile has been rebuilt. <=="
	$(NOECHO) $(ECHO) "==> Please rerun the make command.  <=="
	false



# --- MakeMaker staticmake section:

# --- MakeMaker makeaperl section ---
MAP_TARGET    = perl
FULLPERL      = C:\opt\perl590\bin\perl.exe

$(MAP_TARGET) :: static $(MAKE_APERL_FILE)
	$(MAKE) -f $(MAKE_APERL_FILE) $@

$(MAKE_APERL_FILE) : $(FIRST_MAKEFILE)
	$(NOECHO) $(ECHO) Writing \"$(MAKE_APERL_FILE)\" for this $(MAP_TARGET)
	$(NOECHO) $(PERLRUNINST) \
		Makefile.PL DIR= \
		FIRST_MAKEFILE=$(MAKE_APERL_FILE) LINKTYPE=static \
		MAKEAPERL=1 NORECURS=1 CCCDLFLAGS=


# --- MakeMaker test section:

TEST_VERBOSE=0
TEST_TYPE=test_$(LINKTYPE)
TEST_FILE = test.pl
TEST_FILES = t\00compile.t t\00setup_dummy.t t\backwards.t t\basic.t t\Command.t t\hints.t t\INST.t t\INST_PREFIX.t t\Install.t t\Installed.t t\Liblist.t t\Manifest.t t\Mkbootstrap.t t\MM_BeOS.t t\MM_Cygwin.t t\MM_NW5.t t\MM_OS2.t t\MM_Unix.t t\MM_VMS.t t\MM_Win32.t t\oneliner.t t\Packlist.t t\prefixify.t t\problems.t t\prompt.t t\split_command.t t\testlib.t t\VERSION_FROM.t t\writemakefile_args.t t\zz_cleanup_dummy.t
TESTDB_SW = -d

testdb :: testdb_$(LINKTYPE)

test :: $(TEST_TYPE)

test_dynamic :: pure_all
	$(FULLPERLRUN) "-MExtUtils::Command::MM" "-e" "test_harness($(TEST_VERBOSE), '$(INST_LIB)', '$(INST_ARCHLIB)')" $(TEST_FILES)

testdb_dynamic :: pure_all
	$(FULLPERLRUN) $(TESTDB_SW) "-I$(INST_LIB)" "-I$(INST_ARCHLIB)" $(TEST_FILE)

test_ : test_dynamic

test_static :: test_dynamic
testdb_static :: testdb_dynamic


# --- MakeMaker ppd section:
# Creates a PPD (Perl Package Description) for a binary distribution.
ppd:
	$(NOECHO) $(ECHO) "<SOFTPKG NAME=\"$(DISTNAME)\" VERSION=\"6,10_01,0,0\">" > $(DISTNAME).ppd
	$(NOECHO) $(ECHO) "    <TITLE>$(DISTNAME)</TITLE>" >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) "    <ABSTRACT>Create a module Makefile</ABSTRACT>" >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) "    <AUTHOR>Michael G Schwern &lt;[EMAIL PROTECTED]&gt;</AUTHOR>" >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) "    <IMPLEMENTATION>" >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) "        <DEPENDENCY NAME=\"DirHandle\" VERSION=\"0,0,0,0\" />" >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) "        <DEPENDENCY NAME=\"File-Basename\" VERSION=\"0,0,0,0\" />" >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) "        <DEPENDENCY NAME=\"File-Spec\" VERSION=\"0,8,0,0\" />" >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) "        <DEPENDENCY NAME=\"Pod-Man\" VERSION=\"0,0,0,0\" />" >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) "        <OS NAME=\"$(OSNAME)\" />" >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) "        <ARCHITECTURE NAME=\"MSWin32-x86-multi-thread\" />" >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) "        <CODEBASE HREF=\"\" />" >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) "    </IMPLEMENTATION>" >> $(DISTNAME).ppd
	$(NOECHO) $(ECHO) "</SOFTPKG>" >> $(DISTNAME).ppd


# --- MakeMaker pm_to_blib section:

pm_to_blib: $(TO_INST_PM)
	$(NOECHO) $(PERLRUN) -MExtUtils::Install -e "pm_to_blib([EMAIL PROTECTED], '$(INST_LIB)\auto', '$(PM_FILTER)')"\
	  lib/ExtUtils/Installed.pm blib\lib\ExtUtils\Installed.pm \
	  lib/ExtUtils/MM_OS2.pm blib\lib\ExtUtils\MM_OS2.pm \
	  lib/ExtUtils/MakeMaker.pm blib\lib\ExtUtils\MakeMaker.pm \
	  lib/ExtUtils/Install.pm blib\lib\ExtUtils\Install.pm \
	  lib/ExtUtils/Manifest.pm blib\lib\ExtUtils\Manifest.pm \
	  lib/ExtUtils/Command.pm blib\lib\ExtUtils\Command.pm \
	  lib/ExtUtils/MM_Unix.pm blib\lib\ExtUtils\MM_Unix.pm \
	  lib/ExtUtils/Mksymlists.pm blib\lib\ExtUtils\Mksymlists.pm \
	  lib/ExtUtils/MM.pm blib\lib\ExtUtils\MM.pm \
	  lib/ExtUtils/MANIFEST.SKIP blib\lib\ExtUtils\MANIFEST.SKIP \
	  lib/ExtUtils/MM_Win32.pm blib\lib\ExtUtils\MM_Win32.pm \
	  lib/ExtUtils/MM_UWIN.pm blib\lib\ExtUtils\MM_UWIN.pm \
	  lib/ExtUtils/testlib.pm blib\lib\ExtUtils\testlib.pm \
	  lib/ExtUtils/MakeMaker/vmsish.pm blib\lib\ExtUtils\MakeMaker\vmsish.pm \
	  lib/ExtUtils/MY.pm blib\lib\ExtUtils\MY.pm \
	  lib/ExtUtils/MM_DOS.pm blib\lib\ExtUtils\MM_DOS.pm \
	  lib/ExtUtils/MM_Cygwin.pm blib\lib\ExtUtils\MM_Cygwin.pm \
	  lib/ExtUtils/MM_MacOS.pm blib\lib\ExtUtils\MM_MacOS.pm \
	  lib/ExtUtils/MM_Win95.pm blib\lib\ExtUtils\MM_Win95.pm \
	  lib/ExtUtils/MM_VMS.pm blib\lib\ExtUtils\MM_VMS.pm \
	  lib/ExtUtils/MM_BeOS.pm blib\lib\ExtUtils\MM_BeOS.pm \
	  lib/ExtUtils/Liblist.pm blib\lib\ExtUtils\Liblist.pm \
	  lib/ExtUtils/MakeMaker/Tutorial.pod blib\lib\ExtUtils\MakeMaker\Tutorial.pod \
	  lib/ExtUtils/Packlist.pm blib\lib\ExtUtils\Packlist.pm \
	  lib/ExtUtils/Liblist/Kid.pm blib\lib\ExtUtils\Liblist\Kid.pm \
	  lib/ExtUtils/Mkbootstrap.pm blib\lib\ExtUtils\Mkbootstrap.pm \
	  lib/ExtUtils/MakeMaker/FAQ.pod blib\lib\ExtUtils\MakeMaker\FAQ.pod \
	  lib/ExtUtils/Command/MM.pm blib\lib\ExtUtils\Command\MM.pm \
	  lib/ExtUtils/MM_NW5.pm blib\lib\ExtUtils\MM_NW5.pm \
	  lib/ExtUtils/MM_Any.pm blib\lib\ExtUtils\MM_Any.pm 
	$(NOECHO) $(TOUCH) $@

# --- MakeMaker selfdocument section:


# --- MakeMaker postamble section:


# End.

Re: Fwd: MakeMaker busted with dmake

Reply via email to