If the attached zip file with word document comes through OK, it contains
summaries to the following question:
I know this is an age old topic but was wondering if anyone had any
comments. Basically it involves printing from layout windows to scale.
After many months of typing '333' in the Zoom box for A4, for the
last few years I've been using a bolt on application from a reseller to
achieve scale printing. I would like to know: Do most users use a bolt on
module, write their own code or is there another solution? Does anyone have
any opinions about this?
Many thanks to everybody who replied, also for the comments not included
here.
<<scale.zip>>
Harry Bell
GIS Project Manager
East Dorset District Council
*(01202) 886201 extn.2243
[EMAIL PROTECTED]
Views:
The views expressed in this electronic communication are those of the writer and are
not, unless otherwise stated, the views of East Dorset District Council.
Confidentiality:
The addressee(s) of this electronic communication shall treat its contents in
confidence and take all reasonable steps to ensure that the contents are not accessed
or made available to any third party. No liability arising from unauthorised access
to the information contained in this electronic communication whilst stored on any
computer system or electronic storage media outside of its direct control shall be
accepted by East Dorset District Council.
Virus checking:
Whilst all reasonable steps have been taken to ensure that this electronic
communication and its attachments whether encoded, encrypted or otherwise supplied are
free from computer viruses, East Dorset District Council accepts no liability in
respect of any loss, cost, damage or expense suffered as a result of accessing this
message or any of its attachments.
scale.zip
