Thanks to Vinney, Peter and Mike for replying. All seemed to have different problems and consequently, different solutions. The nearest to the mark was Peter and I'm now sure that MI V 7.0 is the problem as I've tried replicating the problem in V 6.5 without success. Sum actions: Do not open seamless rasters - load individual tiles and then print (Vinney) Download the latest drivers - always a good idea (Mike) Revert to V6.5 and all will print fine (Mark and Peter) Reverting to a previous version of the software is not a solution but has worked for my team in this situation. I'm not sure if MI is aware of this problem or if it is a mixture of V7 plus old plotter driver (I haven't had time to test this) but I hope MI are listening. Will keep the list informed of progress. Mark
-----Original Message----- From: Percival, Mark Sent: 16 December 2002 16:16 To: '[EMAIL PROTECTED]' Subject: HP 800 Plotter All We have just moved offices to 1 floor below in the same building and our plotter seems to be playing up! When printing raster images (at any size) the first part of the raster is repeated until the print finishes but no more of the raster appears. Vectors print as normal even over the top of the repeated raster image - it's starting to look like we'll be able to make our own wrapping paper! Any ideas. Will sum. TIA Mark Percival ICT Client Officer(GIS) ICT Client Team City Development Directorate Coventry City Council mailto:[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> ________________________________________________________________________ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs.
