Hi Colin, Make you map the active window, open the MapBasic window and enter the following followed by hitting the ENTER button:
Set Window FrontWindow() Width 12 Units "cm" Height 12 Units "cm" And you can of course enter any desired size, but be aware that windows only supports (or used to support ??) window size up to approx. 30 cm. If you are still using an ancient measuring system in stead of the metric then you can specify "in" for inch. ;-) HTH, Peter Horsb�ll M�ller GIS Developer Geographical Information & IT COWI A/S Odensevej 95 DK-5260 Odense S Denmark Tel +45 6311 4900 Direct +45 6311 4908 Mob +45 5156 1045 Fax +45 6311 4949 E-mail [EMAIL PROTECTED] http://www.cowi.dk *****CHANGE OF ADDRESS - COWI's offices in Odense are now under the same roof***** On December 8th. 2003, Geographical Information & IT moved from Rugaardsvej 55, 5000 Odense C to Odensevej 95, 5260 Odense S. Please note our new telephone, direct and telefax numbers. > -----Original Message----- > From: Colin Anderson [mailto:[EMAIL PROTECTED] > Sent: Friday, February 06, 2004 11:21 PM > To: [EMAIL PROTECTED] > Subject: MI-L Change Window Size > > > How does one go about changing the proportions and sizes of a > map window? I'm working in other graphics packages to > complete my layout and need to export the map window at the > correct aspect ratio? > > Helllllpppppppppppppp!!!!!!!!!!!!!!!!!!!!!!!!!!!!! > > Colin Anderson > > > --------------------------------------------------------------------- List hosting provided by Directions Magazine | www.directionsmag.com | To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Message number: 10317
