Weeeeeelllll, I'm not sure whether this actually makes our life easier.......

- The Springfield Effect
- The mIddle Corner
- ...

Maybe this would be a job for The Fools World Map ??

Peter Horsb�ll M�ller
GIS Developer
Geographical Information & IT
 
COWI A/S
Odensevej 95
DK-5260 Odense S.
Denmark
 
Tel     +45 6311 4900
Direct  +45 6311 4908
Mob     +45 5156 1045
Fax     +45 6311 4949
E-mail  [EMAIL PROTECTED]
http://www.cowi.dk/gis


-----Original Message-----
From: Neil Havermale [mailto:[EMAIL PROTECTED] 
Sent: Monday, November 08, 2004 10:49 PM
To: Dan Bowles; Bill Thoen
Cc: MapInfo-L
Subject: RE: MI-L Question for Real Surveyors


Simple solution -  joint the "Flat Earth Society"...

http://www.flat-earth.org/

MidNight Mapper
Aka neil

-----Original Message-----
From: Dan Bowles [mailto:[EMAIL PROTECTED] 
Sent: Tuesday, November 09, 2004 7:31 AM
To: Bill Thoen
Cc: MapInfo-L
Subject: RE: MI-L Question for Real Surveyors

Bill

I work at a survey firm so have forwarded your email around for a response, 
hopefully you should get one soon.

I would suggest that your problem is to do with scale factor. For example with 
a 6 degree UTM projection, the scale factor at the central meridian is 1 so you 
will have no distortion. However, at the edge of the zone the scale factor 
could be 0.994, meaning that for every 1000 m you measure you'll be 6 m out 
from the real position of your measurement. In NSW, where I live, surveyors use 
a 2 degree TM system to create a more accurate projection, at the edge of these 
zones the scale factor may be 0.9994. So for every 1000 m measured you'll only 
be 0.6 m out. A much more effective result.



See below for our surveyors answer. Lazy bastards only use cartesian, but it's 
certainly a good way of solving the problem.


Dan,

In most of the surveys which we undertake we do not worry about the

curvature of the Earth. This includes surveys up to 3 km's in the length of

boundaries etc. This would provide a zero misclose in the quoted case.

Cooko



Dan Bowles BSc
GIS Officer
Harper Somers O'Sullivan

PO Box 428
HAMILTON  NSW  2303

E [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
T 02 4961 6500
M 04 3834 8372



---------------------------------------------------------------------
List hosting provided by Directions Magazine | www.directionsmag.com | To 
unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Message number: 13961



---------------------------------------------------------------------
List hosting provided by Directions Magazine | www.directionsmag.com |
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
Message number: 13963

Reply via email to