Thanks to all those who replied to my problem which was:
We have an HP pocket PC running Mobile mapper with a haicom GPS unit plugged in and all functions as expected. The problem is with a Compaq Pocket PC with Mobile mapper loaded and a haicom GPS unit. Mobile mapper works fine on the unit but the Haicon GPS just wont give any indications that it is communicating. Every possible configurable option has been check and played with to no avail. The problem appears to be that the Compaq unit only has provision for 4 com Ports and the Haicom GPS is trying to use Com 7. There doesn't seem to be any resolution to the problem. As Lars put it: Hopefully Compaq have improved their PC building skills since ...... The problem wasn't the external unit, it was the disabled port. Maybe something similar is causing you grief, it being a Compaq So thanks again. Doug Pease GIS Officer Livingstone Shire Council PO Box 600 Yeppoon 4703 Qld Australia Ph 07 49399957 Fax 07 49393290 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this e-mail in error please notify the originator of the message. This footer also confirms that this e-mail message has been scanned for the presence of computer viruses. Any views expressed in this message are those of the individual sender, except where the sender specifies and with authority, states them to be the views of Livingstone Shire Council.
