Hello Folks,
Kinda have a problem creating objects from a converted Excel
Document.
A Little background as to how I use MapInfo here. Being in the
Communications bis the telephone poles an underground plant along the road
these locations are what (poles / pedestals) is what I place on the program
with distances between each. Each pole/pedestal has a specific number /
type associated for that location.
The collected information is place on a Excel spreadsheet. Then
imported into MapInfo.
The Question / Problem with the data is that, I have 6 columns that use
different objects., and or use the information to calculate distances /
location. The way I have been using the program of late, is to create a
layer for each type ( Getting real Old ).
Columns:
* Street
* X-Street
* City
* 1 Column for W to E location ( Pole Id's also constitutes a
grid location for each pole.)
* 1 Column for S to N location
** Looking for a simple coord system without creating a array with
the follow parameters**
The Coord System is broken down into two 5 digit Id's one set for W to E and
the other S to N
example: 50959 40264 ( 50959 for W to E, and 40264 for S to N )
The Five Digits break down:
3 for What Grid 509 402
1 for inch's 5 6
1 for 1/16" 9 4
Basic Breakdown grid:
each grid is 10"x 10"
0 to 100 - W to E / S to N
Column that is used for distances. Which serves 2 purposes one for the
length of a fiber optic cable ( to be created as polyline ), and one for the
support line / trench (as line segments) representing individual distances
between poles/pedestals.
Richard Takacs
Project Manager
Hyperion Communications
[EMAIL PROTECTED]
----------------------------------------------------------------------
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
