Haiti used the secant case of the Lambert Conformal Conic 
on the North American Datum of 1927, (Clarke 1866 
ellipsoid) - This is since the early 1950's.  However, I 
believe this projection and associated Grid were only used 
for the computation of the original Geodetic Triangulation. 
 This was courtesy of the U.S. Army's Inter American 
Geodetic Survey formed after WWII and headquartered in the 
Canal Zone.  The geodetic control and photogrammetric 
mapping was done by the IAGS/Army Map Service.  The 
military 1:50,000 topographic maps were based on the UTM 
Grid, NAD 1927.  If you have access to Haiti topographic 
mapping, I would assume it's UTM.

I think that you will find the initials "MTU" somewhere on 
the map sheets.  That's "UTM" in French, and you will 
probably also find the zone ("Fuseau") number identifying 
the central meridian used.

I have noticed that many tourist maps throughout the 
Caribbean have a "map key" Grid based on numbers and 
letters that just happen to be 1-kilometer or 10-kilometer 
squares for finding local points of interest.  Those 
squares will invariably be identical to the local Geodetic 
Grid system used for that locale.

Clifford J. Mugnier ([EMAIL PROTECTED])
The Topographic Engineering Laboratory
Department of Civil and Environmental Engineering
UNIVERSITY OF NEW ORLEANS
New Orleans, Louisiana  70148

Voice and Facsimilie: (504) 280-7095

On Monday, 28 June, 1999 10:06 AM, Michael S. Dueweke 
[SMTP:[EMAIL PROTECTED]] wrote:
> Hi All:
>
> Does anyone know which projection to use for the country
> of Haiti.  We have developed a basemap based on Lat/Long
> but the maps we are using are in French and they don't
> indicate in english which projection to use.  Any help
> would be appreciated.
>
> Thanks
> Mike Dueweke
> CEITA - Eastern Michigan University
> [EMAIL PROTECTED]
>  << File: ATT00000.html >> 
----------------------------------------------------------------------
To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put
"unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]

Reply via email to