Just tried it and no + doesn't work. I also tried %20,   and  
Brian Fischer Houston Engineering, Inc. Maple Grove, MN (763) 493-4522 -----Original Message----- From: Pericles S. Nacionales [mailto:[EMAIL PROTECTED] Sent: Thursday, February 28, 2008 2:15 PM To: Fischer, Brian Cc: [email protected] Subject: Re: [mapserver-users] WFS and typename issue Brian, I take it the "+" character doesn't work? -Perry Fischer, Brian wrote: > Has anybody else experience problems when using a WFS service where > the typename has a space in it? I'm experiencing the WFS layers that > don't have spaces work fine with MapServer, but ones that do have > spaces produce invalid GML files. Is there an escape character that > can be used to represent the space in the typename? > > The WFS service I am trying to get to work is > http://www.datafinder.org/wfsconnector/com.esri.wfs.Esrimap/MN_MetroGI > S_ > DataFinder_WFS_Water_Resources?request=getcapabilities&service=WFS&ver > si > on=1.0.0 > > The layer without the space works fine, but the rest do not. > > Thanks, > Brian > > Brian Fischer, CFM > GIS Project Manager > Houston Engineering, Inc. | Leave Nothing to ChanceTM > 6901 East Fish Lake Road, Suite 140 > Maple Grove, MN 55369 > Phone: 763.493.4522 / Fax: 763.493.5572 > Email: [EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]> > Website: www.houstonengineeringinc.com > <http://www.houstonengineeringinc.com/> > > > > > ---------------------------------------------------------------------- > -- > > _______________________________________________ > mapserver-users mailing list > [email protected] > http://lists.osgeo.org/mailman/listinfo/mapserver-users _______________________________________________ mapserver-users mailing list [email protected] http://lists.osgeo.org/mailman/listinfo/mapserver-users
