Hello,

I've a doubt about how MapServer handles the EPSG:4326 CRS in WMS 1.3.0.

With the CRS EPSG:4326, longitude/latitude are reverted so the map should be rotated by 90° on the right, with latitude on X axis and longitude on y axis . But on the example below the map has longitude on X axis and latitude on Y axis :

http://demo.mapserver.org/cgi-bin/wms?SERVICE=WMS&VERSION=1.3.0&REQUEST=GetMap&BBOX=-90,-180,90,180&CRS=EPSG:4326&WIDTH=953&HEIGHT=480&LAYERS=bluemarble,cities&STYLES=,&FORMAT=image/png&DPI=96&TRANSPARENT=true

See extract of the WMS 1.3.0 spec below:

################################################################################

6.7.3.1 Introduction
....

The Layer CRS has two axes, denoted x and y. The x axis is the first axis in the CRS definition, the y axis is the second axis. Depending on the particular CRS, the x axis may or may not be oriented West-to-East, and the y axis may or may not be oriented South-to-North. The WMS portrayal operation shall account for axis order, origin and direction in the Layer CRS when projecting geographic information from a Layer CRS to the
Map CS.
Coordinates shall be listed in the order defined by the CRS and shall be mapped appropriately to the Map CS i and j axes, swapping axis order as needed during the projection operation. Many projected coordinate reference systems have an axis and coordinate order other than easting, northing. For example, the Uniform Coordinate System used in Finland (EPSG:2393) orders northing before easting. EPSG geographic coordinate reference systems follow ISO 6709 and always list latitude before longitude.

....
EXAMPLE:
EPSG:4326 refers to WGS 84 geographic latitude, then longitude. That is, in this CRS the X axis
corresponds to latitude, and the Y axis to longitude.

################################################################################



So, what is the right image to obtain, rotated or not?



Thanks in advance.

Bye

            Olivier Terral
_______________________________________________
mapserver-users mailing list
[email protected]
http://lists.osgeo.org/mailman/listinfo/mapserver-users

Reply via email to