Hi,
On 10/12/22 17:35, Basques, Bob (CI-StPaul) wrote:
This might help you get started:
https://github.com/klassenjs/rpi-workshop/blob/master/Workshop.org
We've got 7 of these used in the filed now as standalone Webservers, with Wifi
access. No internet required. You just turn it on. You can add in a Battery
and/or connect directly to a 12v power source like the ignition switch for
power from a vehicle, and it's always on.
Real low power and depending on how big a card you use, a lot of data. Our
survey version has over 250k geolocated document scans available.
This is a map based system, but it a whole Server Stack configuration, so
should give you a good head start.
We ran this as a workshop at a OSGeo conference a few years back.
Cool! Not very much detail about mapserver, though. I'm planning to
throw my stuff to Github too, once I got a little further. I'm a little
bit more on the complicated side with 4G/5G and potential other IP over
radio being in the mix. Also looking at batman-adv for meshing and
testing some ideas for voice/radio over IP. I found a very nice CM4
baseboard which is tiny and still has space for an 42mm NVME SSD, so
atm I'm planning for 256G storage in addition to the EMMC.
-S
--
(o_ Stefan Gofferje | SCLT, MCP, CCSA
//\ Reg'd Linux User #247167 | VCP #2263
V_/_ https://www.gofferje.net | https://www.saakeskus.fi
_______________________________________________
MapServer-users mailing list
[email protected]
https://lists.osgeo.org/mailman/listinfo/mapserver-users
