Hi Tim, AFAIK there were some SDE bugs in 4.8.1 which were fixed in CVS head and to be released in 4.8.2.
Are you able to check with the CVS head version? Best regards, Bart -----Oorspronkelijk bericht----- Van: UMN MapServer Users List [mailto:[EMAIL PROTECTED] Tim Bowden Verzonden: donderdag 9 maart 2006 8:30 Aan: [email protected] Onderwerp: [UMN_MAPSERVER-USERS] sde data layers & get capabilities with 4.8.1 Hi, Our testing of 4.8.1 has thrown up what looks like an interesting bug with the get capabilities statement for a wms service. We have a map file that works fine with 4.6.2. All data layers are from an sde box. When we do a getcapabilites request using 4.8.1 it returns a partial statement that ends at the last sde layer. No matter how many layers we have it is always the last sde layer where it fails. If we take out all layers it works. If we have only a shape file as a data source the .map file works. Has anyone experienced this or have any suggestions? Thanks, Tim Bowden -- Mapforge Geospatial Level 3/ 267 St Georges Tce Perth 6000 Western Australia Disclaimer ************************************************************************ Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te informeren. Wij adviseren u om bij twijfel over de juistheid of de volledigheid van de mail contact met afzender op te nemen. This message shall not constitute any rights or obligations. This message is intended solely for the addressee. If you have received this message in error, please delete it and notify the sender immediately. When in doubt whether this message is correct or complete, please contact the sender. ************************************************************************
